![](/images/new-backgrounds/1236182/23618219x1.webp)
| cover is not open |
Action 3 | completely. |
both the video and audio are turned off automatically.
If this status persists for ten minutes, the projector is turned off automatically.
Action 4
Action 5
Action 6
This indicates that it has changed to Cooling mode, because the internal temperature of the projector has increased beyond the maintenance limit.
If the internal temperature of the projector increases higher than the limit, it is turned off automatically.
The lamp
malfunctions after power turns off
abnormally or after powering on right after turning off the projector.
If the internal temperature of the projector has increased beyond the maintenance limit, it is changed to Cooling mode before it is turned off automatically.
*Cooling mode: The status that the fan speed has increased and the lamp of the projector has been changed to ECO mode by force. Check whether the ventilating hole of the projector is blocked. Check whether the air filter is blocked. Clean it if it is blocked. Check whether the surrounding temperature of the projector is higher than the standard temperature range of the projector.
Cool the projector sufficiently and operate it again.
Check whether the ventilating hole of the projector is blocked. Check whether the air filter is blocked. Clean it if it is blocked. Check whether the surrounding temperature of the projector is higher than the standard temperature range of the projector.
Cool the projector sufficiently and operate it again.
If the same problem occurs continually, contact your product distributor or service center.
Turn the power off, wait for a sufficient amount of cooling time and then turn the power on to operate. If the same problem occurs continually, contact your product distributor or service center.
When the screen becomes
Check the lamp usage time on the Information Display screen. If you
Action 7need to replace the lamp, contact your product distributor or service darker
center.
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation.
Rear Side
1. PC OUT port | 7. [AV IN] VIDEO Input port |