User Guide
3.Function of Each Component
■Fixed focus lens
•Fixed focus lens installed on the camera.
Please take cautions that any dust or foreign matter gathers on the front glass surface of the lens.
■Main body
•A body that supports the camera.
■PCB board
•This part is quite important since it performs the camera function. Please handle with care.
■Power cable
•The terminal that is connected to the power (adaptor) cable. Connect to DC 12V.
■Video signal output cable
•The cable that sends the video signal.
■Dome cover
•The transparent plastic cover that protects the camera. Be careful not to make a scratch on it.
User Guide
■Function Switch
Function switch located at the rear side of the camera within the dome cover. Sets the White Balance mode.
■ATW (Auto Tracing White Balance
Automatically adjusts the color temperature of the screen (within 2500-
9500 color temperature range) according to the temperature change in | E |
external environments. |
■AWC (Auto White Balance Control)
Adjusts the color temperature to the color temperature stored when switched to AWC.
ATW
AWC
SW72
4 | 5 |