Samsung SCC-C4303AP, SCC-C4301P manual White BAL, Special

WHITE BAL

In the WHITE BAL option, you can set the White Balance function, which enables you to see the white color correctly under illumination of any color temperature. If you set the WHITE BAL option to ATW, the camera will continuously monitor changes in the ambient color temperature and automatically set the White Balance according to the color temperature. If you set the WHITE BAL option to AWC, place a piece of white paper in front of the camera, and press the ENTER button, the Auto White Balance Control will be activated just once to set the color temperature and this value will be maintained.

If you set the WHITE BAL option to MANUAL, you can customize the white balance to take into account the current lighting condition.

☞3200°K : Select to set the color temperature to 3200°K.

☞5600°K : Select to set the color temperature to 5600°K.

☞USER : Select to set the color temperature by selecting appropriate values from the RED and BLUE graphs.

MANU : If you select the MANU option and press the ENTER button, a screen from which you can manually select the white balance will appear. In the PRESET option, use the LEFT and RIGHT buttons to select 3200°K, 5600°K, or USER.

SPECIAL

You can manually adjust the LANGUAGE, V-SYNC, CTRL TYPE, RS485, PIP, MIRROR, D-ZOOM, POSI/ NEGA, ZOOM SPEED, and DETAIL.

The V-SYNC option is available only with the SCC-C4301(P) and C4303(P).

☞V - SYNC : Specify the vertical synchronization method that will be used by the SCC-C4301(P) and C4303(P).

There are 2 types of vertical synchronization signal that the camera supports : INT mode in which the signal is generated by the camera's internal clock and LINE mode which sets the vertical synchronization by the external power frequency. If you select LINE and press ENTER button, the LL-PHASE screen from which you can adjust the phase of LINE LOCK will appear. You can specify the desired phase level in the PHASE option.

(AWB/MANU)

PRESET OFF(USER)..

RED (-2C) ---I----

BLUE (-5B) -I------

RET

Press the

ENTER button.

(LL-PHASE)

PHASE (0) --------

RET

21

22