Samsung SCC-C4303AP, SCC-C4301P manual Preparing the Cables, Video Cable

PreparingtheCables

To install and use the camera, first prepare the following cables.

The requirements for the power adapter, which connects to the camera's POWER IN terminal, are as follows:

ConnectingtheCables

1.Connect one end of the BNC cable to the VIDEO OUT.

2.Connect the other end of the BNC cable to the VIDEO IN of the monitor.

●SCC-C4201(P), SCC-C4203(P) : DC12V 600mA

●SCC-C4301(P), SCC-C4303(P) : AC24V 300mA DC12V 600mA

Video terminals on the back of the monitor

BNC cable

E

Video Cable

Use a BNC cable, such as the one shown below, to connect the camera's VIDEO OUT to the monitor.

3.Plug in the power adapter. Use a "minus" screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows :

POWER SELECTION switch underneath the power adapte

POWER SELECTION switch underneath the power adapte