Safety Precautions
The purpose of safety precautions is to prevent accidental injury or property damage. Always observe all safety precautions.
✽The precautions are divided into "Warnings" and "Cautions" as distinguished below:
|
|
Warning | Caution |
Ignoring this precaution | Ignoring this precaution |
may result in death or | may result in injury or |
serious injury. | damage to property. |
|
|
Warnings
1.Be sure to use only the standard adapter which is specified in the specification sheet. (page 28~31) Using any other adapter could cause fire, electrical shock, or damage to the product.
2.Check the external connection terminals first before connecting the power source and signal wires. Connect the alarm signal wires to the alarm terminals. Connect the DC12V power adapter to the
Connect the DC12V or AC24V power adapter to the
3.Do not connect multiple cameras to a single adapter. (Exceeding the capacity may cause abnormal heat generation or fire.)
4.Securely plug the power cord into the power receptacle. (A loose connection may result in fire.)
5.When mounting the camera on a wall or ceiling, fasten it safely and securely. (A falling camera may
cause personal injury.) | E |
6.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Serious injury may result from fire, electrical shock, or falling objects.)
7.Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.)
8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electrical shock.)
9.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (Problems caused by unauthorized user disassembly or repairs are not covered by your warranty.)
10.When cleaning, do not spray water directly onto parts of the product. (Doing so may cause fire or electrical shock.) Gently wipe the surface with a dry cloth. Never use detergents or chemical cleaners on the product, as this may result in discoloration of surface or cause damage to the finish.
1 | 2 |