6 Others
ZOOM/FOCUS Remote Terminals
These terminals are to activate the ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and AF functions by using an external controller. They could be set to one of four modes depending on the input condition: A, B, C, and D. (SPECIAL - CTRL TYPE)
(Operating Voltage Range : +3V~+13V,
1)If voltage is applied to either the ZOOM or FOCUS terminal, but not both
Function*1 | TELE (Up) | WIDE (Down) | NEAR (Left) | FAR (Right) |
Code | ZOOM Terminal | FOCUS Terminal | ||
A | +6V | +6V | ||
B | +6V | +6V | ||
C | +6V | +6V | ||
D | +6V | +6V | ||
1:In MENU OFF, these are used to control the ZOOM/FOCUS function, and in MENU ON, these are used as the UP, DOWN, LEFT, and RIGHT keys
2)If voltage is applied to the ZOOM and FOCUS terminals at the same time
Function | ENTER/AF*1 | HOME RETURN*2 | ||
Code | ZOOM Terminal | FOCUS Terminal | ZOOM Terminal | FOCUS Terminal |
A | +6V | +6V | ||
B | +6V | +6V | ||
C | +6V | +6V | ||
D | +6V | +6V | ||
1 : With the menu "off", if voltage is applied for shorter than 2 seconds, the AF function will be activated, and if voltage is applied for longer than 2 seconds, the menu will be "on".
With the menu "on", if voltage is applied, the ENTER function will be activated.
2 : If voltage is applied for longer than 2 seconds, the
camera will return to the specified home position E (PRESET 0).
HOME RETURN
If no keys are pressed for a period of time, the camera will automatically return to the specified home position.
The home position is set to PRESET 0. If the position of PRESET 0 has not been saved, the HOME RETURN function will not work.
Setting the Home Return Time
➞ OFF ➞ 1 MIN ➞ 2 MIN ➞ 3 MIN~60 MIN ➞ 2HOUR ➞ 3HOUR ~12HOUR
33 | 34 |