Samsung SNC-C6225P, SNC-C7225P manual Safety information

Page 2

safety information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the fl oor/wall in accordance with the installation instructions.

If this power supply is used at 12V DC, a suitable plug adapter should be used.

WARNING

1.Be sure to use only the standard adapter that is specifi ed in the specifi cation sheet. Using any other adapter could cause fi re, electrical shock, or damage to the product.

2.Incorrectly connecting the power supply or replacing battery may cause explosion, fi re, electric shock, or damage to the product.

3.Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fi re.

4.Securely plug the power cord into the power receptacle. Insecure connection may cause fi re.

5.When installing the camera, fasten it securely and fi rmly. The fall of camera may cause personal injury.

6.Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers fi lled with water on top of the camera. Doing so may cause personal injury due to fi re, electric shock, or falling objects.

7.Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fi re or electric shock.

8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fi re or electric shock.

9.If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.)

10.When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock

11.If the camera is installed or rebooted after power failure when ambient temperature is below the freezing point, the dome cover is frosted. In this case, the frost will be disappeared after 3 hours after turning on the power.

(It is noted that lowest guaranteed operating temperature is -45ºC(-49ºF) without wind.).

2 – 10x Network Mini Smart Dome Camera

Image 2
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Features IntroductionLinksys Netgear Recommended PC SpecificationsCompatible IP Routers SNC-C6225 Product & AccessoriesAccessories Product Main BodySNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Camera ID Setup InstallationDIP Switch Setup Communication Protocol SetupInstallation Using Surface Mount on the Ceiling RS-485 Termination ResistorInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket SNC-C6225/SNC-C7225 Power ConnectionCabling RS-485 CommunicationAudio Input/Ouput Connection Alarm Input ConnectionVideo Connection InternalRemoving an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardInserting an Micro Sdhc Memory Card Selecting a memory card that’s suitable for you What is a memory card?Memory Card Information not Included Operation Pattern PresetAuto PAN Other Functions ScanSchedule FlipGeneral Rules of KEY Operation for Menu SET Preset ×××OSD Display of Main Screen Pattern ×System Information Display Setup Motion Setup How to use osd menuStructure of the Setup Menu Function SetupSystem Initialize Camera SetupSystem Setup Main Menu Display SetupPrivacy Zone Mask Setup System InformationPrivacy Zone Size Adjustment Motion SetupPrivacy Zone Area Setup Function Setup Parking Action SetupEdit Preset Label Preset SetupEdit Preset Scene Auto PAN Setup Pattern SetupEdit Scan Scan SetupEdit Pattern OPT Action no NONE/PRESET/AUTO PAN/PATTERNSet up items such as Action NO., Dwell and OPT Schedule Setup Edit ScheduleAuto Exposure Setup Camera SetupWhite Balance Setup System Setup Language SET Home PositionSET North Direction FAN RUN TempSystem Initialize Initial Configuration TableIP address Subnet Mask Default Gateway Network connection & setupNetwork connection and setup processes are given as follows SNC-C6225 XDSL or Cable Modem IP RouterSetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Installer screen layout Searching for the CameraSetting static ip Manual Network SettingIf more than one camera are connected to an IP Router Device Port a port used to control video transmission.Automatic Network Setting Enter your passwordPort Forwarding Port Mapping Setting Setting dynamic ipDynamic IP Setting Examples of using Dynamic IPConnecting to the camera Using the cameraConnecting to the Camera Http//e30002c.websamsung.net10000 Login window appearsFor Windows XP Service Pack Installing ActivexConnecting to the camera using the IP Installer program Checking the Ddns addressLogging to the camera Web viewer Main ScreenUsing the Camera Power PTZTo stop a recording, click the Record button once again To Record a Video At desired scene, click the Record buttonIs started You can select the desired time to search the alarm events Using the SD Search Viewer ScreenAlarm Input ScheduleSetup Screen Layout Setup toolSetting the Camera SetupVideo & Audio Configuration MAC Address IPv6 EnableIP Type IP AddressDigital Image Stabilizer UserLanguage LOG Software UpdateDATE/TIME Https ResetTransfer Setup Record Setup Alarm Image Setup Alarm Input SetupConfiguration MotionFunction Motion SensitivityTransfer Interval Streaming SetupSchedule Transfer Function Streaming ProtocolDdns Snmp User Setup SnmpTroubleshooting Problem SolutionAppendix SNC-C6225N/P CCDSNC-C7225N/P DetailsNtsc PAL LevelPipe Thread DimensionUnit mm Unit mm Wall Mount Bracket Rev
Related manuals
Manual 76 pages 19.96 Kb Manual 76 pages 1.63 Kb Manual 76 pages 6.77 Kb Manual 76 pages 37.71 Kb

SNC-C6225P, SNC-C7225P specifications

The Samsung SNC-C7225P and SNC-C6225P are advanced security cameras designed for professional surveillance applications. Equipped with state-of-the-art features and technologies, these cameras offer high-quality video capture, robust performance, and reliable durability for various environments.

One of the standout features of the SNC-C7225P is its high-resolution image capturing capability. With a 2 Megapixel sensor, it can produce clear and detailed images, ensuring that critical details are not lost in the footage. This is complemented by a wide dynamic range (WDR) capability, which allows the cameras to maintain image quality in challenging lighting conditions. Whether it's bright sunlight or deep shadows, both models are equipped to handle various lighting environments, ensuring high image clarity.

Both the SNC-C7225P and SNC-C6225P utilize advanced compression technologies, including H.264 and MJPEG, which allow for efficient storage and bandwidth usage without compromising video quality. This is particularly beneficial for users requiring extensive surveillance systems, as it helps reduce storage costs and enhances streaming performance.

Connectivity options are plentiful with these cameras. They feature Power over Ethernet (PoE) support, which simplifies installation by allowing the device to receive power and transmit data over a single cable. This feature is particularly advantageous in situations where electrical infrastructure may be limited or difficult to set up.

In terms of durability, the SNC-C7225P and SNC-C6225P are built to withstand the elements. With weatherproof housing and robust construction, these cameras can operate effectively in diverse environmental conditions. This makes them suitable for both indoor and outdoor installations, whether in retail spaces, educational institutions, or industrial sites.

Furthermore, these models come equipped with intelligent video analytics capabilities, including motion detection, tampering detection, and advanced event management tools. This feature set allows for enhanced security monitoring and the ability to receive real-time alerts based on user-defined criteria.

In summary, the Samsung SNC-C7225P and SNC-C6225P represent a compelling choice for those in need of reliable and high-performance surveillance solutions. With their superior image quality, advanced compression technologies, solid durability, and comprehensive features, they are well-suited for a wide range of security applications, ensuring peace of mind for users in various sectors.