Samsung SNC-C6225P, SNC-C7225P manual Setting the IP address

Page 40

network connection & setup

ex2) If the address (LAN IP) of the IP router is 192.168.0.1 IP address: 192.168.0.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1

ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1 IP address: 192.168.xxx.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.xxx.1

MFor the address of the IP router, refer to the product’s documentation.

Checking if the IP router is connected to the xDSL/Cable modem properly

Select <Status> from the Settings menu of the IP Router.

•If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway> provided by your ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP router connects to the camera. However, note that certain ISPs change the settings of <IP Address>, <Subnet Mask> and <Gateway> on a regular basis.

•If the IP router is not properly connected, press the [Connect] button to try to reconnect or check if the settings of the IP router are correct.

Setting the IP address

•Refer to "Setting Static IP" on page 46 or "Setting Dynamic IP" on page 49.

Connecting a local PC in the IP router to the camera

1.Run the IP Installer on your local PC and search for the camera.

2.If found, double-click the camera to start the Internet browser and try to connect to the camera. Alternately, launch the Internet browser manually and enter the IP address of the camera found in the address bar to connect to it.

ex) http://192.168.1.2

Connecting to the camera from a remote PC

1.You can’t use the IP Installer on a remote PC that is not connected to the IP router. This is because the IP Installer does not work on the Internet.

2.You can use DDNS URL of the camera to connect to the IP router internal camera.

3.However, you must set the port-forwarding for the IP router before you can connect to the IP router internal camera from a remote PC.

For more information on the port-forwarding, refer to “Port Forwarding (Port Mapping) Setting” on page 49.

4.When the port forwarding is done, run the Internet browser on the remote PC and enter the DDNS URL address or, the Internet IP address of the IP router in the address bar for connecting to the camera.

ex) http://e30002c.websamsung.net

•For the DDNS URL address, refer to “Checking the DDNS address” on page 51.

40 – 10x Network Mini Smart Dome Camera

Page 39 Page 41
Image 40
Page 39 Page 41
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Features IntroductionCompatible IP Routers Recommended PC SpecificationsLinksys Netgear Product & Accessories AccessoriesSNC-C6225 Product Main BodySNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Installation DIP Switch SetupCamera ID Setup Communication Protocol SetupInstallation Using Surface Mount on the Ceiling RS-485 Termination ResistorInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket Power Connection CablingSNC-C6225/SNC-C7225 RS-485 CommunicationAlarm Input Connection Video ConnectionAudio Input/Ouput Connection InternalInserting an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card Memory Card Information not Included What is a memory card?Selecting a memory card that’s suitable for you Operation Auto PAN PresetPattern Scan ScheduleOther Functions FlipSET Preset ××× OSD Display of Main ScreenGeneral Rules of KEY Operation for Menu Pattern ×How to use osd menu Structure of the Setup MenuSystem Information Display Setup Motion Setup Function SetupSystem Setup Camera SetupSystem Initialize Display Setup Privacy Zone Mask SetupMain Menu System InformationPrivacy Zone Area Setup Motion SetupPrivacy Zone Size Adjustment Function Setup Parking Action SetupEdit Preset Scene Preset SetupEdit Preset Label Auto PAN Setup Pattern SetupEdit Pattern Scan SetupEdit Scan Set up items such as Action NO., Dwell and OPT Action no NONE/PRESET/AUTO PAN/PATTERNOPT Schedule Setup Edit ScheduleWhite Balance Setup Camera SetupAuto Exposure Setup System Setup SET Home Position SET North DirectionLanguage FAN RUN TempSystem Initialize Initial Configuration TableNetwork connection & setup Network connection and setup processes are given as followsIP address Subnet Mask Default Gateway SNC-C6225 XDSL or Cable Modem IP RouterSetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Installer screen layout Searching for the CameraSetting static ip Manual Network SettingIf more than one camera are connected to an IP Router Device Port a port used to control video transmission.Automatic Network Setting Enter your passwordSetting dynamic ip Dynamic IP SettingPort Forwarding Port Mapping Setting Examples of using Dynamic IPUsing the camera Connecting to the CameraConnecting to the camera Http//e30002c.websamsung.net10000 Login window appearsInstalling Activex Connecting to the camera using the IP Installer programFor Windows XP Service Pack Checking the Ddns addressLogging to the camera Web viewer Main ScreenUsing the Camera Power PTZIs started To Record a Video At desired scene, click the Record buttonTo stop a recording, click the Record button once again Using the SD Search Viewer Screen Alarm InputYou can select the desired time to search the alarm events ScheduleSetup tool Setting the CameraSetup Screen Layout SetupVideo & Audio Configuration IPv6 Enable IP TypeMAC Address IP AddressLanguage UserDigital Image Stabilizer DATE/TIME Software UpdateLOG Transfer Setup ResetHttps Record Setup Alarm Image Setup Alarm Input SetupMotion FunctionConfiguration Motion SensitivityStreaming Setup Schedule Transfer FunctionTransfer Interval Streaming ProtocolDdns Snmp User Setup SnmpTroubleshooting Problem SolutionAppendix SNC-C6225N/P CCDSNC-C7225N/P DetailsNtsc PAL LevelUnit mm DimensionPipe Thread Unit mm Wall Mount Bracket Rev
Related manuals
Manual 76 pages 19.96 Kb Manual 76 pages 1.63 Kb Manual 76 pages 6.77 Kb Manual 76 pages 37.71 Kb

SNC-C6225P, SNC-C7225P specifications

The Samsung SNC-C7225P and SNC-C6225P are advanced security cameras designed for professional surveillance applications. Equipped with state-of-the-art features and technologies, these cameras offer high-quality video capture, robust performance, and reliable durability for various environments.

One of the standout features of the SNC-C7225P is its high-resolution image capturing capability. With a 2 Megapixel sensor, it can produce clear and detailed images, ensuring that critical details are not lost in the footage. This is complemented by a wide dynamic range (WDR) capability, which allows the cameras to maintain image quality in challenging lighting conditions. Whether it's bright sunlight or deep shadows, both models are equipped to handle various lighting environments, ensuring high image clarity.

Both the SNC-C7225P and SNC-C6225P utilize advanced compression technologies, including H.264 and MJPEG, which allow for efficient storage and bandwidth usage without compromising video quality. This is particularly beneficial for users requiring extensive surveillance systems, as it helps reduce storage costs and enhances streaming performance.

Connectivity options are plentiful with these cameras. They feature Power over Ethernet (PoE) support, which simplifies installation by allowing the device to receive power and transmit data over a single cable. This feature is particularly advantageous in situations where electrical infrastructure may be limited or difficult to set up.

In terms of durability, the SNC-C7225P and SNC-C6225P are built to withstand the elements. With weatherproof housing and robust construction, these cameras can operate effectively in diverse environmental conditions. This makes them suitable for both indoor and outdoor installations, whether in retail spaces, educational institutions, or industrial sites.

Furthermore, these models come equipped with intelligent video analytics capabilities, including motion detection, tampering detection, and advanced event management tools. This feature set allows for enhanced security monitoring and the ability to receive real-time alerts based on user-defined criteria.

In summary, the Samsung SNC-C7225P and SNC-C6225P represent a compelling choice for those in need of reliable and high-performance surveillance solutions. With their superior image quality, advanced compression technologies, solid durability, and comprehensive features, they are well-suited for a wide range of security applications, ensuring peace of mind for users in various sectors.
Top Page Image Contents