Samsung SNC-C7225P, SNC-C6225P manual FCC Statement

Page 3

safety information

12.Do not expose the product to the direct airfl ow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome due to temperature difference between internal and external of the dome camera.

13.If you install this product in a low-temp area such as inside a cold store, you must seal up the wiring pipe with silicon, so that the external air can not fl ow inside the housing.

Otherwise, external high, humid air may fl ow inside the housing, pooling moisture or vapor inside the product due to a difference between internal and external temperature.

CAUTION

1.Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 140°F), low temperature (below -49°F), or high humidity. Doing so may cause fi re or electric shock.

3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fi re or damage to the product.

5.Keep out of direct sunlight and heat radiation sources. It may cause fi re.

6.Install it in a place with good ventilation.

7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8.Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1)This device may not cause harmful interference, and

2)This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a com- mercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

English – 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesRecommended PC Specifications Compatible IP RoutersLinksys Netgear Product Main Body Product & AccessoriesAccessories SNC-C6225SNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Communication Protocol Setup InstallationDIP Switch Setup Camera ID SetupRS-485 Termination Resistor Installation Using Surface Mount on the CeilingInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket RS-485 Communication Power ConnectionCabling SNC-C6225/SNC-C7225Internal Alarm Input ConnectionVideo Connection Audio Input/Ouput ConnectionINSERTING/REMOVING AN Micro Sdhc Memory Card Inserting an Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Operation Preset Auto PANPattern Flip ScanSchedule Other FunctionsPattern × SET Preset ×××OSD Display of Main Screen General Rules of KEY Operation for MenuFunction Setup How to use osd menuStructure of the Setup Menu System Information Display Setup Motion SetupCamera Setup System SetupSystem Initialize System Information Display SetupPrivacy Zone Mask Setup Main MenuMotion Setup Privacy Zone Area SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupPreset Setup Edit Preset SceneEdit Preset Label Pattern Setup Auto PAN SetupScan Setup Edit PatternEdit Scan Action no NONE/PRESET/AUTO PAN/PATTERN Set up items such as Action NO., Dwell and OPTOPT Edit Schedule Schedule SetupCamera Setup White Balance SetupAuto Exposure Setup System Setup FAN RUN Temp SET Home PositionSET North Direction LanguageInitial Configuration Table System InitializeSNC-C6225 XDSL or Cable Modem IP Router Network connection & setupNetwork connection and setup processes are given as follows IP address Subnet Mask Default GatewaySetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingExamples of using Dynamic IP Setting dynamic ipDynamic IP Setting Port Forwarding Port Mapping SettingHttp//e30002c.websamsung.net10000 Login window appears Using the cameraConnecting to the Camera Connecting to the cameraChecking the Ddns address Installing ActivexConnecting to the camera using the IP Installer program For Windows XP Service PackLogging to the camera Main Screen Web viewerPower PTZ Using the CameraTo Record a Video At desired scene, click the Record button Is startedTo stop a recording, click the Record button once again Schedule Using the SD Search Viewer ScreenAlarm Input You can select the desired time to search the alarm eventsSetup Setup toolSetting the Camera Setup Screen LayoutVideo & Audio Configuration IP Address IPv6 EnableIP Type MAC AddressUser LanguageDigital Image Stabilizer Software Update DATE/TIMELOG Reset Transfer SetupHttps Record Setup Alarm Input Setup Alarm Image SetupMotion Sensitivity MotionFunction ConfigurationStreaming Protocol Streaming SetupSchedule Transfer Function Transfer IntervalDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix CCD SNC-C6225N/PDetails SNC-C7225N/PLevel Ntsc PALDimension Unit mmPipe Thread Unit mm Wall Mount Bracket Rev
Related manuals
Manual 76 pages 19.96 Kb Manual 76 pages 1.63 Kb Manual 76 pages 6.77 Kb Manual 76 pages 37.71 Kb

SNC-C6225P, SNC-C7225P specifications

The Samsung SNC-C7225P and SNC-C6225P are advanced security cameras designed for professional surveillance applications. Equipped with state-of-the-art features and technologies, these cameras offer high-quality video capture, robust performance, and reliable durability for various environments.

One of the standout features of the SNC-C7225P is its high-resolution image capturing capability. With a 2 Megapixel sensor, it can produce clear and detailed images, ensuring that critical details are not lost in the footage. This is complemented by a wide dynamic range (WDR) capability, which allows the cameras to maintain image quality in challenging lighting conditions. Whether it's bright sunlight or deep shadows, both models are equipped to handle various lighting environments, ensuring high image clarity.

Both the SNC-C7225P and SNC-C6225P utilize advanced compression technologies, including H.264 and MJPEG, which allow for efficient storage and bandwidth usage without compromising video quality. This is particularly beneficial for users requiring extensive surveillance systems, as it helps reduce storage costs and enhances streaming performance.

Connectivity options are plentiful with these cameras. They feature Power over Ethernet (PoE) support, which simplifies installation by allowing the device to receive power and transmit data over a single cable. This feature is particularly advantageous in situations where electrical infrastructure may be limited or difficult to set up.

In terms of durability, the SNC-C7225P and SNC-C6225P are built to withstand the elements. With weatherproof housing and robust construction, these cameras can operate effectively in diverse environmental conditions. This makes them suitable for both indoor and outdoor installations, whether in retail spaces, educational institutions, or industrial sites.

Furthermore, these models come equipped with intelligent video analytics capabilities, including motion detection, tampering detection, and advanced event management tools. This feature set allows for enhanced security monitoring and the ability to receive real-time alerts based on user-defined criteria.

In summary, the Samsung SNC-C7225P and SNC-C6225P represent a compelling choice for those in need of reliable and high-performance surveillance solutions. With their superior image quality, advanced compression technologies, solid durability, and comprehensive features, they are well-suited for a wide range of security applications, ensuring peace of mind for users in various sectors.
Top Page Image Contents