Samsung MM39RH/NSI, MM29RH/XEG Timer Function, Cancelling the Timer, If you select You must also

Page 12

Timer Function

The timer enables you to switch the system on or off at specific times. GB Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1Switch the system on by pressing POWER.

2Press TIMER/CLOCK until TIMER is displayed.

3Press PROGRAM/SET.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4Set the timer switch-on time.

a Set the hour by pressing TUNING and . b Press PROGRAM/SET.

Result: The minutes flash.

c Set the minutes by pressing TUNING and . d Press PROGRAM/SET.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5Set the timer switch-off time.

a Set the hour by pressing TUNING and . b Press PROGRAM/SET.

Result: The minutes flash.

c Set the minutes by pressing TUNING and . d Press PROGRAM/SET.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6Press TUNING and to adjust the volume level and press PROGRAM/SET.

Result: The source to be selected is displayed.

7Press TUNING and to select the source to be played when the system switches on.

If you select...

You must also...

TAPE (cassette)

Insert a recorded cassette in one of

 

the decks before setting the system

 

to standby.

 

 

TUNER (radio)

a Select the FM or AM frequency

 

band by pressing TUNING

 

and

.

 

 

b Press PROGRAM/SET.

 

c Select a preset station by pressing

 

TUNING

and .

CD (compact disc)

a Load one or more compact discs.

8Press POWER to set the system to standby mode.

Result: is displayed to the bottom left of the time, indicating that the timer has been set. The system will switch on and off automatically at the required times.

If the timer switch on and off times are identical, the word

ERROR is displayed.

1 8

2

34 5 6 7

4 5

6 7

4 5

6 7

Cancelling the Timer

After having set the timer, it will start automatically as shown by

the indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...

Press TIMER ON/OFF

Cancel the timer

Once.

 

 

Result:

is no longer displayed.

Restart the timer

Twice.

 

 

Result:

is displayed again.

12

Image 12
Contents Micro Compact System with Remote Control Safety Warnings Class 1 Laser ProductContents Inserting Remote Control Batteries Connecting the LoudspeakersRed wire to the + terminals Black wire to the terminals To achieve the correct sound quality, connectConnecting the AMMW/LW Aerial Connecting the FM AerialSetting the Clock Listening to a Compact DiscPrecautions When Using Compact Discs CD Repeat FunctionTo repeat Press CD Repeat Current track indefinitelyYou can store up to FM station MW station LW station Medium WaveLong Wave Improving Radio Reception Selecting a Stored StationYou can listen to a stored radio station as follows To listen to PressSelecting the Cassette Playback Mode Listening to a CassetteTape Counter Maintaining the Sound QualityRecording a Radio Programme Repeat a Recommendations for RecordingFunction Playback, the musicTimer Function Cancelling the TimerPress Timer ON/OFF If you select You must alsoSleep Timer Super Bass SoundEqualizer Are listeningAbout PS Name Mode About RT ModeAbout RDS broadcasting Description on RDS functionWhen the CD Digital OUT jack is not being used CD Digital Out JackPTYProgram Type indication and PTY-SEARCH function DAT deck, MD recorder, etcPower sound function Connecting HeadphonesSurround-sound Connect the audio cable to the rear of the systemSafety Precautions Before Contacting the After-Sales ServiceFront Panel View Remote Control Technical Specifications Rear Panel ViewElectronics