Searching for and Storing the Radio Stations(continued) | Selecting a Stored Station |
6Adjust the volume by:
Pressing VOLUME 
or 
on the front panel or
Pressing the VOL. + or - buttons on the remote control
7Select the stereo or mono mode by pressing MONO/ST.
Result: The MONO indicator is displayed when selected.
8If you do not want to store the radio station found, revert to Step 4 and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result: The program number and PROGRAM are displayed for a few seconds.
b Press TUNING 
and 
to assign a program number between 1 and 15.
c Press PROGRAM/SET to store the radio station.
Result: PROGRAM is no longer displayed and the station is stored.
9To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an existing program number.
8
7
6
8 | 8 |
6
You can listen to a stored radio station as follows:
GB
1Switch the system on by pressing POWER.
2Select the TUNER function by pressing TUNER/BAND on the front panel.
3Select the required frequency band by pressing TUNER/BAND on the remote control or TUNER/BAND again on the front panel.
4Select the radio station as follows.
To listen to ... | Press ... |
|
|
A stored station | a Press the TUNING MODE button | ||
| until “PRESET” is displayed. | ||
| b TUNING | and | to select the |
| required program. |
| |
Another station | TUNING | and | until the |
| required frequency is displayed. | ||
Press TUNING MODE again to exit the stored station selection function.
1
4 | 4 |
2 3 | 4 |
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or MW aerial
Testing the positions of the FM and MW aerials before fixing them permanently
If reception from a specific FM radio station is poor, press MONO/ST to switch from stereo mode to mono. The quality of the sound will be improved.
8 | 8 |
6
9