Checking and Changing Programmed Tracks
You can check and change your selection of tracks at any time.
GB | You must have selected at least one track. |
|
1Press STOP ( 
) once if you have started listening to the selection.
2Press PROGRAM/SET.
Each time you press PROGRAM/SET, the next selection is displayed.
3Press PROGRAM/SET one or more times until the track to be changed is displayed.
4Press SKIP 
or 
to select the new track.
5Press CD ( 
) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
2 3
1
5
4 
4
Searching for and Storing the Radio Stations
You can store up to:
15 FM station
8 MW station
7 LW station
1Switch the system on by pressing POWER.
2Select the TUNER function by pressing TUNER/BAND on the front panel.
3Select the required frequency band by pressing TUNER/BAND again on the front panel or TUNER/BAND on the remote control.
Result: The appropriate indication is displayed:
FM | Frequency Modulation |
MW | Medium Wave |
LW | Long Wave |
4To search for a Press TUNING MODE on the front
station...panel
Manually | One or more times until MANUAL is displayed. |
Automatically | One or more times until AUTO is displayed. |
5Select the station to be stored by:
Pressing tuning DOWN or UP on the front panel or
Pressing TUNING 
or 
on the remote control
To scroll through the frequencies faster when searching
manually, hold down the TUNING DOWN 
or UP 
buttons.
The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.
2 3
4
1 
5 | 5 |
8