Resume Function

EV-Z1GB-RDS 6/4/03 9:47 Page 14

Programming the Order of Playback

The order of the track desired to listen

The track not desired to listen

A maximum of up to 24 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	Load the selected CDs.
2	If the CD function is selected, stop the player by pressing			button .


3	Press Program/Set.
	Result: The following indications are displayed:

		Program no.	Track no. on the disc
4	Select the required track by pressing:
		to move back through the tracks
		to move back through the tracks
5		to move forward through the tracks
		to move forward through the tracks
	Press Program/Set to confirm your selection.
	Result: The selection is stored and is displayed.
6	To select other tracks, repeat Steps 4 to 5.

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.


2	Press Program/Set twice.
	Result: The following indications are displayed:

		Program no.	Track no. on the disc

If you have already programmed 24 tracks, Ch is displayed instead of Pr when you press Program/Set.

3	Press Program/Set one or more times until the track to be changed
	is displayed.
4	Press	or		to select a different track.


5	Press Program/Set to confirm your change.
6	Press CD (		) to start listening to the selection.


	Result: The first track selected is played.

RDS

Open/Close +10 Display PTY

7 Press CD (

) to listen to the track selection in the order programmed.

1 CD

Repeat Random

8	To...	Press...
	Listen to the current track again		once


	Listen to the previous track		twice


	Listen to the next track		once
	Listen to the next track		once
	Skip forwards or backwards		or	the appropriate
	Skip forwards or backwards		or	the appropriate
	one or more tracks	number of times
9	To cancel the selection, press	button.