Samsung EVZ1RH/ELS manual Timer Function, Cancelling the Timer

EV-Z1GB-RDS 6/4/03 9:47 Page 18

Timer Function

GB

The timer enables you to switch the system on or off at specific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing On/Standby (		) .
2	Press Timer/Clock until	Timer is displayed.
3	Press Program/Set.

Timer Timer/

On/Off Clock2

1,9

P.Sound Sleep AUX

S.Bass EQ Demo Dimmer

RDS

Open/Close +10 Display PTY

Result: On Time is displayed for a few seconds, followed by any

switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

a	Set the hour by pressing	or	button.
b	Press Program/Set.
	Result: The minutes flash.
c	Set the minutes by pressing	or	button.

CD

3,4,5,6,7,8

Repeat Random

d Press Program/Set.

Result: Off Time is displayed for a few seconds, followed by any

switch-off time already set; you can now set the timer

switch-off time.

Set the timer switch-off time.
5 a Set the hour by pressing	or	button.

bPress Program/Set. Result: The minutes flash.

cSet the minutes by pressing or button.

dPress Program/Set.

Result: Volume 20 is displayed, where 20 corresponds to the volume already set.

6	Press	or	button to adjust the volume level and press
	Program/Set.
	Result: The source to be selected is displayed.
7	Press	or	button to select the source to be played when the
	system switches on.
	If you select...			You must also...
	TUNER (radio)			a Press Program/Set.
				b Select a preset station by pressing
				Tuning	or	.
	CD (compact disc)			Load a compact disc.
8	Press Program/Set to confirm the timer.
9	Press On/Standby (			) to set the system to standby mode.
	Result:	is displayed to the bottom right of the time, indicating that

the timer has been set. The system will switch on and off automatically at the required times.

If the timer switch on and off times are identical, the word Error is displayed.

Program/	VOL.	Band
Set
4,5,6,7		4,5,6,7
	Mode
	VOL.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press Timer On/Off...
Cancel the timer	Once.
	Result:	is no longer displayed.
Restart the timer	Twice.
	Result:	is displayed again.

Timer Timer/

On/Off Clock

P.Sound Sleep AUX

17