Connecting to an External Source

EV-Z1GB-RDS 6/4/03 9:47 Page 9

The auxiliary input can be used to take advantage of the sound quality of your ULTRA SLIM audio system when listening to other sources.

	Examples:				A television
					A video disc player
					A Hi-Fi stereo video cassette recorder
	To connect the external source, the source must have an audio
	output. In addition, you need an RCA connection cable.

1	Set the system to standby mode and disconnect it and the external
	source from the main.
2	Connect the audio cable to the rear of the ULTRA SLIM audio system.
	Connect the...					To the connector marked...

	Red jack					R (right)
	White jack					L (left)
		For optimum sound quality, do not invert the right and left
		channels.
3	Plug the system back into the main socket and press On/Standby
4	(		) to switch it on.
	(		) to switch it on.
	Select the AUX source by pressing the AUX button.
	Result:			AUX	is displayed.

Viewing the Various Functions on Your System

1 Press the Demo button.

Result: The various functions available are listed in turn on the display.

All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.

2 To cancel this function, press Demo again.

Timer Timer/

On/Off Clock

P.Sound Sleep AUX

S.Bass EQ Demo Dimmer

RDS

Open/Close +10 Display PTY

5 Switch the external source on.

Repeat Random

AUX IN

SPEAKERS

(6 )

Timer Timer/

On/Off Clock

P.Sound Sleep AUX

You can adjust the brightness of the LCD display depending on the surrounding lighting conditions

Press the Dimmer button on the remote control to adjust the brightness.

The selection switches each time the button is pressed:

Timer Timer/

On/Off Clock

P.Sound Sleep AUX

S.Bass EQ Demo Dimmer

RDS

Open/Close +10 Display PTY

S.Bass EQ Demo Dimmer

RDS

Open/Close +10 Display PTY

Repeat Random

Program/ VOL. Band