Searching for and Storing the Radio Stations(continued) |
| Selecting a Stored Station |
|
|
|
6Adjust the volume by:
GB
Pressing VOLUME + or - on the front panel
or
Pressing the VOL. + or - buttons on the remote control
7Select the stereo or mono mode by pressing Mono/ST.
Result: The MONO indicator is displayed when selected.
8If you do not want to store the radio station found, revert to Step 4 and search for another station.
Otherwise:
a Press Program/Set.
Result: The program number and PROG are displayed for a few seconds.
b Press TUNING 
and 
to assign a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result: PROG is no longer displayed and the station is stored.
9To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an existing program number.
You can listen to a stored radio station as follows:
1Switch the system on by pressing On/Standby.
2Select the TUNER function by pressing TUNER/Band on the front panel.
3Select the required frequency band by pressing TUNER on the remote control or TUNER/Band again on the front panel.
4Select the radio station as follows.
To listen to ... | Press ... |
|
|
A stored station | a Press the Tuning Mode button | ||
| until “PRESET” is displayed. | ||
| b TUNING | and | to select the |
| required station. |
| |
Another station | TUNING | and | until the |
| required frequency is displayed. | ||
Press Tuning Mode again to exit the stored station selection function.
| Power | Program |
|
EQ Preset | Sound | /Set | AUX |
Sleep | 8 |
CD Repeat Mono/ST. TUNER | |
| 7 Band |
| TAPE |
| CD |
On/Standby | Timer | Timer/ | |
|
| On/Off | Clock |
1 | Power | Program |
|
|
| ||
EQ Preset | Sound | /Set | AUX |
Sleep | CD Repeat | Mono/ST. | TUNER |
|
| 2 3 |
|
|
|
| Band |
| VOL. |
4 | 4 |
| TUNINGTuning |
CD | MODEMode |
CD | |
| 4 |
| VOL. |
| 6 |
|
| VOL.. |
|
| TUNING |
|
8 CD | MODE | 8 |
CD |
VOL.. 
6
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them permanently
If reception from a specific FM radio station is poor, press Mono/ST to switch from stereo mode to mono. The quality of the sound will be improved.
Repeat |
| |
A | B |
|
|
| PTY |
RDS | Display | |
|
| CD |
|
| Sync. |
|
| REC/ |
|
| Pause |
|
| 8 |
Band |
|
TUNER | CD |
TAPE | AUX |
Down | Tuning Mode | Up |
8
Volume
6
Mute
EQ
S.Bass
Power
Sound
Push Eject
| Power | Program |
|
EQ Preset | Sound | /Set | AUX |
Sleep | CD Repeat | Mono/ST. | TUNER |
Band
TAPE
CD
12