Samsung MML4RH/ELS Listening to a Cassette Mute Function, Maintaining the Sound Quality, Result

Listening to a Cassette MUTE Function

You can turn the sound off temporarily on your system.

1	Switch the system on by pressing On/Standby.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open the cassette deck by pushing on the corner of the cover
	marked PUSH EJECT until you hear a click and then releasing it.

Example: You wish to answer a telephone call.

1Press the Mute button.

GB

4	Insert the pre-recorded cassette with the open edge of the tape
	facing downwards.
5	Close the deck by pushing on it until it clicks into place.
6	Press the play(		) button.
	Result:	The cassette starts playing.

Result: MUTE is displayed and the sound is switched off.

2To switch the sound back on at the same volume as before, press Mute again.

7 Press any of the following buttons during playback, as required.

To...	Press...
Listen to the same track again	once
Listen to the next track	once
Listen to the previous track	twice
Listen to the track of your choice	or	the appropriate

	number of times
Result:	The number of tracks remaining is displayed and
	changes as you move forward or backward
	through the tracks.

Repeat
A	B
		PTY
RDS		Display
		CD
		Sync.
		REC/

Band

TUNER CD

TAPE		AUX
Down	Tuning Mode	Up

Volume

Mute

EQ

S.Bass

Power

	If there are very quiet passages on a track, the
	automatic search function may stop before the end of
	the track. Also, a very short silence between two tracks
	may not be detected.
8
	To...	Press...
	Adjust the volume	VOLUME + or – buttons
	Stop the playback or search	STOP (	)

9When the cassette is stopped, select one of the following functions as required.

To...Press...

Rewind the cassette

Fast-forward the cassette

The cassette player stops automatically when the beginning or end of the cassette is reached.

			On/Standby
		1	8
Repeat			Volume
A	B

						Band
				PTY	TUNER		CD	Mute
			RDS	Display		2 6		EQ
				CD	TAPE		AUX	S.Bass
				Sync.
				REC/	Down	Tuning Mode	Up	Power
				Pause				Sound
				7 9		8	7 9	3 5
								Push Eject
Slee	CD Re eat		Mono/ST.		TUNER
							8	VOL..
		7 9			Band
		TAPE
								TUNING
	7 9				8		CD	MODE
		CD						CD
							8
								VOL..

Maintaining the Sound Quality

To obtain the best possible results from your cassette player, you must clean it regularly (heads, roller and drive capstan).

Open the deck by pressing the PUSH EJECT button.

Use a cotton bud and a special cassette cleaning agent to clean the:

Heads ( )

Roller ( )

Drive capstan ( )

To guarantee hours of enjoyable listening with your cassettes:

Check that the tape in the cassette is always sufficiently taut.

Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Avoid using 120-minute cassettes as they are extremely fragile.

33

2 1 2

15