Samsung SNC-B5368P manual Testing the camera, Wiring Cover, Compartment, Release Lock, Direction

Item	Description
Inner Cover	Cover used to protect the main unit.
Wing-Side Hook	Tap on either end to remove the inner cover.
Monitor Out	The Test Monitor Cable is connected to a portable displayer and used for
	testing the camera.
Zoom Lever	Used to adjust or fix the zoom factor of the lens.
Focus Lever	Turn it to the left or right to adjust the focus; turn it clockwise to fix the focus.
Tilt Screw	Used to adjust or fix the tilt of the lens.
Bracket	Used to install the camera on the wall or ceiling with the screws.
	If you drill a hole in the wiring cover for wiring, remove the cover and attach
Wiring Cover	the provided dust-proof plate to it, and arrange the cables through the plate.
	The dust-proof plate is to prevent outside dust from inflow to the wiring
	compartment.
	If you want to remove the bracket from the main unit or remove the camera
Release Lock	from the bracket, push this out and turn the main unit in the <UNLOCK>
	direction.

● OVERVIEW

English _13