Selecting the Automatic Operating Mode
You can start the air conditioner in AUTO mode by pressing | ||
the MODE button on the control panel. | ||
1 | If necessary, press the ON/OFF( | ) button. |
| Result: ◆ The power indicator on the control panel comes on. | |
| ◆ The indoor unit beeps twice. |
|
| ◆ The operation mode previously set is displayed. | |
| ◆ The air conditioner starts up in the mode selected | |
| when the unit was last used. | |
| IMPORTANTE The air conditioner is fitted with a protection mechanism | |
| to prevent the unit from being damaged when it is started | |
| immediately after being: |
|
| ◆ Switched on |
|
| ◆ Stopped |
|
| lt will start up normally after a | |
2 If the AUTO indicator is not displayed, press the MODE button one or | ||
| more times until it appears. |
|
| Result: ◆ The indoor unit beeps each time you press MODE. | |
| ◆ The air conditioner starts up in AUTO mode. | |
| ◆ The standard temperature is set automatically. | |
| Note In AUTO mode, the optimum fan speed is selected automatically | |
| and cannot be changed. |
|
| ◆ You can change modes at any time. | |
3 To control the air flow direction when necessary, refer to page 15. | ||