Cooling Your Room
You must select the COOL mode if you wish to adjust the: ◆Cooling temperature
◆Fan speed when cooling
1 If necessary, press the ON/OFF( |
| ) button. |
|
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps twice.
◆The operation mode previously set is displayed.
◆The air conditioner starts up in the mode selected when the unit was last used.
IMPORTANTE The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
It will start up normally after a
2If the COOL indicator is not displayed, press the MODE button one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press MODE.
◆The air conditioner starts up in Cool mode.
To operate the unit by remote control, press the COOL button.
Note You can chage modes at any time.
3 | If the “SET TEMP” and “TEMP” indicators are not displayed, |
|
|
| press the TIME/TEMP. SELECT button to appear it. |
|
|
|
|
|
|
| To adjust the temperature, press the TIME/TEMP. | ▲ or | ▼ buttons |
4 | |||
| one or more times until the required temperature is displayed. |
|
|
| Possible temperature are between 18°C and 30°C inclusive. |
| |
| Result: ◆ Each time you press the TIME/TEMP. | ▲ or | ▼ |
-The temperature is adjusted by 1°C
-The indoor unit beeps.
◆The air conditioner will only start cooling if the room temperature is higher than the selected temperature.
◆ During cooling, the operating indicator( | ) on the control |
panel comes on. |
|
5Select the fan speed by pressing the FAN SPEED button one or more times until the required setting is displayed:
Low
Medium
High
To select the fan speed by remote control, press LOW, MID or HIGH buttons.
Note Each time you press FAN SPEED, the indoor unit beeps.
ENGLISH |