How to change the direction of the drain hose
1.Dismount the back cover of the washing machine.
2.Put down the drain hose. Take off
the drain hose hook. Then take off the screws of the drain hose rack.
Put the drain hose into the cabinet. (As indicated in Figure 2).
Back cover
Figure 1
3.Extend the drain hose from the other side, then fix the screw of the drain hose rack, fix the drain hose hook and hang the drain hose on the cabinet.
(As indicatedin Figure 3).
4.Install the back cover, first put the down claws on the cabinet, and then put the claws(marked with 
)into the cabinet from down to up, and fix the screws. (As indicated in Figure 4)
Figure 3
Drain hose rack
Screws 
| Up claws | |
| Screws | |
| Two sides claws | |
Figure 2 | Down claws | |
Figure 4 | ||
|
The drain hose shall drain smoothly.
1The height of the drain hose shall be less than 10cm , or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2 Do not trample or press the drain hose.
3If the drain hose is too long, cut it at mid point. To make smooth drainage,cut the front end of the hose slantingly.
4If extra drain hose is needed,please make separate purchase.The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.
5 If the extra hose is too long,cut it either at A or at B point.
8
