Phenomena
The spinning is intermittent when it starts.
Push the “spin” button to select “Spin”, but it doesn’t work.
There may be some water flowing out of the drain hose in the first use of the machine.
The wash procedure is paused.
The pulsator pauses during water inlet in wash and rinse.
When the power plug is inserted,computer board indicator is switched on, and the machine starts working.
Explanation
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is needed before it starts spinning.
It is the water remained in the factory inspection of performance.
The cloth sensor is checking the cloth, it will add water after 48 seconds.
It is to avoid splashing during water inlet.
It is the special resume function. In the case of power failure or the power plug is loose during washing, the machine can save the running program, and resume the program after the power supply is recovered. You do not need to set the program again.
Specification
Injection pressure | 0.001 MPa |
|
|
Washing / Spinning capacity | 7.0kg/7.0kg |
|
|
