14
1
2
3
4
Cleaning the lint filter:
Pushdo wn the spring piece at the top of the lint filter to make th e claws out of the filter cover,
andth en pull out the lint filter to get it down.(figure 1)
Putth e lint filter into filter cover, and make it tight .
Makesur e the lint filter well installed, or it can influe nce your use.
Pullt he back cover of the lint filter, and then you can get down it off t he front cover of the
lintfilte r.(figure 2) Sweep the rubbish in the lint filter.Put the back cover of the lint filter into
thef ront cover .
Filter cover
Lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
Figure 1 Figure 2
Notes:Thefilt er screen of the water inlet valve is likely to be bloc ked by foreign materials and
influence the water inlet. Please clean it with b rush every two
months.
Ifth e cabinet is dirty, wipe it with wet cloth
Donot flu sh it directly with water.
Wipe it with neutral detergent.
Donot w ipe it with thinner, petrol, alcohol etc.
After washing, close the water faucet.
(If nee ded, you can dismantle the water inlet hose).
Donot s tore water in the washing machine for a long pe riod.
Drain the water completely after each usi ng.
Besur e to pull off the power plug before maintenan ce.
Hangu p the power cord and drain hose.
Wipe off the water drops on the surfac e of the machine and inside the tub. Open th e top lid
fors ome time ( about 1 hour), then close the top lid.