FARGO electronic HDP820 Print Platen Roller

RESTRICTED USE ONLY Fargo Electronics, Inc.

HDP800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 256

Step Procedure

1Leave the Printer power ON and open the Print and Transfer Stations.

If using a Printer with a Card Lamination Module attached, also open the

Lamination Module's Top Cover and Lamination Station.

2Remove the Print Ribbon and HDP Film.

3Locate the Print Platen Roller, as shown below.

4Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean.

Continued on the next page

Print Platen Roller