JVC MA372IEN KD-G347, Basic operations, Tuner operations, Disc operations, More About This Unit

KD-G347

CD RECEIVER: INSTRUCTIONS/INSTALLATION

GET0491-001A

[EE]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.

Installation/connection are explained at the last section of this manual (reverse page, indicated with symbol).

0907DTSMDTJEIN

EN

© 2007 Victor Company of Japan, Limited

ENGLISH

IMPORTANT FOR LASER PRODUCTS

1.	CLASS 1 LASER PRODUCT
2.	CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified

MORE ABOUT THIS UNIT

	service personnel.
3.	CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4.	REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Basic operations

•By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.

•If you turn off the power while listening to a disc, disc play will start from where it had been stopped previously next time you turn on the power.

Tuner operations

• During SSM search...

– All previously stored stations are erased and the

stations are stored anew.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in No. 1 will be

–The pickup lens inside the unit is dirty.

–The files on the CD-R/CD-RW are written using the “Packet Write” method.

–There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

Playing an MP3/WMA disc

•	This unit can play back MP3/WMA files with the
	extension code <.mp3> or <.wma> (regardless of the
	letter case—upper/lower).
•	This unit can show the names of albums, artists
	(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for

For safety...

•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

•Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

Warning

If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident.

Caution on volume setting

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

automatically tuned in.

• Network-Tracking Reception requires two types of

RDS signals—PI (Programme Identification) and AF

(Alternative Frequency) to work correctly.

• If a Traffic Announcement is received by TA Standby

Reception, the volume level automatically changes to the

preset level (TA VOL) if the current level is lower than the

preset level.

• When Alternative Frequency Reception is activated

(with AF selected), Network-Tracking Reception is also

activated automatically. On the other hand, Network-

Tracking Reception cannot be deactivated without

deactivating Alternative Frequency Reception.

MP3 files and for WMA files

• This unit can display only one-byte characters. No other

characters can be correctly displayed.

• This unit can play back MP3/WMA files meeting the

conditions below:

– Bit rate: 8 kbps — 320 kbps

– Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

– Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet,

Windows long file name

• The maximum number of characters for file/folder names

PREPARATIONS

How to reset your unit Detaching the control panel

Reset the unit after installation is complete.

• Your preset adjustments will also be erased. Attaching the control panel

How to forcibly eject a disc

•Be careful not to drop the disc when it ejects.

•If this does not work, reset your unit.

• If you want to know more about RDS, visit

<http://www.rds.org.uk>.

Disc operations

Caution for DualDisc playback

•The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

General

•This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA formats.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• Some CD-Rs or CD-RWs may not be played back on this

unit:

– Discs are dirty or scratched.

– Moisture condensation has occurred on the lens inside

vary depending on the disc format used (includes 4

extension characters—<.mp3> or <.wma>).

– ISO 9660 Level 1: up to 12 characters; ISO 9660 Level

2: up to 31 characters; Romeo: up to 128 characters;

Joliet: up to 64 characters; Windows long file name: up

to 128 characters

• This unit can recognize a total of 512 files, 200 folders,

and 8 hierarchical levels.

• This unit can play back files recorded in VBR (variable bit

rate).

Files recorded in VBR have a discrepancy in the elapsed

time display, and do not show the actual elapsed time.

In particular, this difference becomes noticeable after

performing the search function.

• This unit cannot play back the following files:

– MP3 files encoded in: MP3i and MP3 PRO format, in an

inappropriate format, layer 1/2.

– WMA files: encoded in lossless, professional, and voice

format; not based upon Windows Media® Audio; copy-

protected with DRM.

– Files which have data such as WAVE, ATRAC3, etc.

• The search function works but search speed is not

constant.

Basic settings

Enter PSM menu.

Select an item.

1Canceling the display demonstrations

Select “DEMO,” then “DEMO OFF.”

2 Setting the clock

the unit.

MAINTENANCE

Finish

Adjust.

Select “CLOCK H” (hour), then adjust the hour.

Select “CLOCK M” (minute), then adjust the

minute.

Select “24H/12H,” then “24H” (hour) or

“12H” (hour).

How to clean the connectors

Wipe the connectors with a cotton swab or cloth moistened with alcohol.

Connectors

Moisture condensation

To keep discs clean

Wipe in a straight line from center of disc to edge. Do not use liquid cleaners, thinners, or benzene.

To play new discs

Available characters on the display
Available characters	Display indications

Moisture may condense on the lens inside the unit. Eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

Do not use the following discs:

Single CD (8 cm disc) Warped disc

Remove any rough areas from the inner and outer edges of the disc.

Sticker and sticker residue Stick-on label

Unusual shape	C-thru Disc (semi-	Transparent or semi-transparent
	transparent disc)	parts on its recording area

1– EN