FARGO electronic HDP820 Adjusting the Card Stacker Output Guide

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 170
Adjusting the Card Stacker Output Guide
Step Procedure
1Open the Card Output Hopper Door and locate the Card Stacker Output Guide
closest to the front of the Printer.
•Adjust the stacker's Card Output Guide to the proper card size prior to
printing. (Note: This will ensure consistent card ejecting and stacking.)
•If the Card Stacker Output Guide is not set prior to printing, it can cause
jams.
Continued on the next page