Ensure the air conditioner is installed in compliance with current national safety standards.
Use a rated circuit breaker only.
•Never use steel wires or copper wires as a circuit breaker. It may cause fire or unit malfunction.
Use an exclusive power source for the air conditioner.
•Potential risk of electric shock or fire.
Do not put undue stress on the power cable or place heavy objects on the outdoor unit.
Do not bend the power cable excessively.
• Potential risk of fire or electric shock.
If the air conditioner becomes wet, turn the power off immediately and call your nearest contact center.
• Potential risk of fire or electric shock.
Install an exclusive circuit breaker and
•Potential risk of electric shock or fire.
If the power cable or cord is damaged, the manufacturer, a qualified service technician must replace it to avoid a potential risk.
Disconnect the air conditioner from power supply before it is repaired or disassembled.
Use a receptacle that has a ground terminal. The receptacle must be used exclusively for the air conditioner.
•Improper electrical grounding may cause electric shock or fire.
Ensure proper ground has been established when installing the air conditioner. Do not connect the ground cable of the unit to a gas pipe, a water pipe or a telephone line.
•Potential risk of electric shock.
ENGLISH
safety information _05