Selecting Energy Saving Mode
ENGLISH
If you wish to save energy when using your air conditioner, select the
Energy Saving mode with the Energy Saving button.
1 If necessary, press the | (On/Off) button. | |
Result: | ◆ The operation indicator on the indoor unit lights up. | |
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2 Select COOL mode by pressing the 
button.
Note You can select the Energy Saving mode only in COOL mode.
3 Press the | button. |
|
Result: | ◆ The indoor unit beeps. |
|
| ◆ The air conditioner runs in the Energy Saving mode. | |
| ◆ The outer air flow blade moves up and down. |
|
| ◆ To stop the Energy saving mode, press the | button again. |
4 To adjust the temperature, press the 
button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive.
Note If you want to adjust temperature under 26°C, cancel the
Energy Saving mode before adjusting the temperature.
5 To select the fan speed, press the 
button one or more times until the required setting is displayed.
6To control the direction of the air flow, refer to page 17.