Removing Excess Humidity
ENGLISH
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press the | (On/Off) button. |
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up normally after three minutes.
2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press the button.
◆The air conditioner runs in DRY mode. Note You can change modes at any time.
3 To adjust the temperature, press the | button one or more times |
until the required temperature is displayed. |
|
Possible temperatures are between 18°C and 30°C inclusive. | |
Result: ◆ Each time you press the | button: |
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
4To control the direction of the air flow, refer to page 17.