Samsung NZ64K5747BK/EG manual Safety shutoff, Residual heat indicator, Temperature detection

Page 14

Parts and features

Parts and features

Safety shutoff

If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.

Any residual warmth will be indicated with , (for “hot”) in the digital displays corresponding to the particular cooking zones.

The cooking zones switch themselves off at the following times.

Heat setting

Switch off

 

 

1-3

After 6 hours

 

 

4-6

After 5 hours

 

 

7-9

After 4 hours

 

 

10-15

After 1.5 hours

 

 

NOTE

If the Hob is overheated because of abnormal operation, will be displayed. And the Hob will be switched off.

NOTE

If cookware is unsuitable or too small or no cookware has been placed on the cooking zone, will be displayed.

And after 1 minute the corresponding cooking zone will be switched off.

NOTE

Should one or more of the cooking zones switch off before the indicated time has elapsed, see the section “Troubleshooting”.

Other reasons why a cooking zone will switch itself off

All cooking zones will switch themselves off if liquid boils over and lands on the control panel.

The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, the appliance will need to be switched on again using the main On/Off control sensor after the liquid or the cloth has been removed.

14  English

Residual heat indicator

When an individual cooking zone or the hob is turned off, the presence of residual heat is shown with an , (for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.

You can use the residual heat for thawing or keeping food warm.

WARNING

As long as the residual heat indicator is illuminated, there is a risk of burns.

WARNING

If the power supply is interrupted, the , symbol will go out and information about residual heat will no longer be available.

However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob.

Temperature detection

If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.

When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself off depending upon the temperature of the electronics.

NZ64K5747BK_EU_DG68-00797A-00_EN.indd 14

3/2/2016 3:38:31 PM

Image 14
Contents Induction Hob Contents Using this manual Safety instructionsSafety instructions Safety instructions Disposing of the packaging material Proper disposal of your old applianceInstalling the hob Safety instructions for the installerConnecting to the mains power supply Installing into the countertop Hob Parts and features Cooking zonesControl panel Components Induction heatingKey features of your appliance Temperature detection Safety shutoffResidual heat indicator Cookware for induction cooking zones Initial cleaningHob use Suitability testOperating noises Using suitable cookwareSize of pans Select cooking zone and heat setting Using the touch control sensorsSwitching the appliance on Quick stop Switching the appliance offUsing the child safety lock Timer Count down Power boost control Timer Count upUsing keep warm Flex control Power managementPause Suggested settings for cooking specific foods Sound on/offLight soiling Cleaning and careHob Stubborn soiling To avoid damaging your appliance Problem dirtHob frame option Warranty and service FAQs and troubleshootingService Technical data Product informationQuestions or COMMENTS?
Related manuals
Manual 84 pages 26.16 Kb Manual 28 pages 57.96 Kb