NOTE
Do not use one piece of cookware on both the left and right cooking zones.
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well.
Switching the appliance on
The appliance is switched on using the On/ Off control 
sensor.
Touch the On/Off control 
sensor for approximately 1~2 seconds.
The digital displays will show 
.
NOTE
After the On/Off control 
sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 20 seconds. Otherwise, the appliance will switch itself off for safety reasons.
Select cooking zone and heat setting
1.For selecting the cooking zone, touch
the corresponding cooking zone’s sensor.
2.For setting and adjusting the power
level, touch the Heat setting sensor.
NOTE
The default level is set to 15 when selecting the cooking zone.
NOTE
If more than one sensor is pressed for longer than 8 seconds, 
will show in the heat setting display.
English 17
Hob use
3/2/2016 3:38:32 PM