Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost 
function, Power Management automatically reduced the heat setting of cooking zone.
•No.1 and No.2 is paired
•No.3 and No.4 is paired
|
| 3 | The indicator for this cooking zone | ||
1 | |||||
|
|
|
| alternates for some seconds between the set | |
|
|
|
| ||
|
|
|
| heat setting and the maximum possible heat | |
2 | 4 | setting. After then, the indicator changes | |||
from the set heat setting to maximum | |||||
|
|
|
| ||
possible heat setting.
Pause
The Pause 
function simultaneously switches all cooking zones that are switched on to the low power setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
When the Pause 
function is activated, all touch sensors except for the Pause 
, Lock 
and the On/Off control 
sensors are disabled. To resume cooking,
touch the Pause 
sensor again.
| Control Panel | Display |
|
|
|
To Switch On | Touch Pause |
|
|
|
|
To Switch Off | Touch Pause | Return to previous power level |
|
|
|
Flex control
The Flex function can operate complete left side cooking zone for using large size cookware. (example : oval cookware, fish kettle)
1.Touch the Flex zone 
sensor.
2.For setting and adjusting the power
level, touch the Heat setting sensor.
NOTE
Touch the Flex zone sensor during opertaing, Flex zone function will be off.
NOTE
If you touch Flex zone sensor while each burner operation different level, burner set at a high level.
English 21
Hob use
3/2/2016 3:38:34 PM