Hob use
Switching the appliance off
To completely switch off the appliance, use the On/Off control 
sensor.
Touch the On/Off control 
sensor for approximately 1~2 seconds.
NOTE
After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an 
, 
two steps for “hot”. The temperature is lowered, 
, 
wil be disappeared.
Quick stop
To switch off a cooking zone, press the cooking zone sensor during 2 seconds.
Hob use
NOTE
The Quick Stop function does not work with the Flex Zone sensor 
.
18 English
Using the child safety lock
You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface. Also the control panel, with the exception of the On/Off control 
sensor (Only turn off control), can be locked in order to prevent the settings from being changed unintentionally, for example, by wiping over the panel with a cloth.
Switching the child safety lock On/Off
1.Touch the Lock control 
sensor for
approximately 3 seconds.
An acoustic signal will sound as confirmation.
2.Touch any control sensor.
will appear in the displays, indicating the child safety lock has been activated.
3. For switching the child safety lock off, touch the Lock control 
sensor again for 3 seconds. An acoustic signal will sound as confirmation.
NOTE
Regardless of power on/off, child lock is activated.
NOTE
You can use Lock control during cooking. In this case, To turn off the burner, you should operate lock off or Power OFF.
3/2/2016 3:38:33 PM