Note: The cassette player comes with a block of foam to protect the cassette play- er’s playback head during shipment. Re- move the foam before loading a tape.
1.Take up any slack in the tape by turn- ing the cassette’s hub with a pencil. Do not touch the exposed tape.
2.Slide OPEN in the direction of the arrow and open the compartment door by pulling it toward you.
3.Insert a cassette into the door’s tape guides with the cassette’s open edge facing up and the desired side visible through the window.
4.Close the cassette compartment door.
PLAYING A TAPE
1.If the radio is on, turn it off by repeat- edly pressing RADIO ON/OFF BAND until the display is turned off.
2.Slide NOR HI/MTL to NOR for Type I (normal bias) cassette tapes or to HI/ MTL for Type II (high bias) and Type IV (metal) tapes.
Using the Tape Player | 25 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|