Radio Shack SCP-107 owner manual Using Vehicle Battery Power

14-1250.DS.fm Page 11 Tuesday, May 16, 2000 2:32 PM

before you disconnect it from the cas- sette player.

Follow these steps to connect the cas- sette player to AC power.

1.Set the adapter’s voltage switch to 3V, if necessary.

2.Insert the Adaptaplug into the adapter’s cord so it reads + TIP.

3.Insert the plug into the cassette player’s DC 3V jack.

4.Plug the adapter into a standard AC outlet.

Using Vehicle Battery Power

You can power the cassette player from a vehicle’s 12V power source (such as a cigarette-lighter socket) using a 3V, 250- mA regulated DC adapter and a size A Adaptaplug (neither supplied). Both are available at your local RadioShack store.

Cautions:

•You must use a power source that supplies regulated 3V DC and deliv- ers at least 250 mA. Its center tip must be set to positive and its plug

Preparation11