Important Safety Information

Samsung NP10FP00MT/SEG Important Safety Information, Safety Instructions, Setting Up your System

Page 2

Safety Instructions

Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.

Always follow these instructions to help guard against personal injury and damage to your system.

Setting Up your System

•Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.

•Do not use this product near water or a heat source such as a radiator.

•Set up the system on a stable work surface.

•The product should be operated only with the type of power source indicated on the rating label.

•Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit.

•If your computer has a voltage selector switch, make sure that the switch is in the proper position for your area.

•Openings in the computer case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the computer ventilation openings.

•Ensure that the fan vents on the bottom of the casing are clear at all times. Do not place the computer on a soft surface, doing so will block the bottom vents.

•If you use an extension cord with this system, make sure that the total ampere rating on the products plugged into the extension cord does not exceed the extension cord ampere rating.

ii Users Manual

Image 2

Contents

Macrovision Statement Setting Up your System Important Safety InformationSafety Instructions Care During Use Battery DisposalReplacement Parts and Accessories Laser Safety Note Laser SafetyPower Cord Requirements General RequirementsWireless Guidance Regulatory Compliance StatementsPage European Union European DirectivesPage Vcci Statement Wireless DevicesJapan Prior to setting up your device Information Icons Using Your DocumentationManual Documentation Conventions Keyboard ConventionsTouchpad Conventions Software User DocumentationCD-ROM Device Naming Convention Windows ConventionsFront Where Everything IsIntroducing Your Computer Buttons and LEDs Back Side Right SideLeft Side Bottom To install the battery pack Using Your Computer for the First TimeInstalling the Battery To attach the power cord Attaching the AC AdapterTo adjust the LCD Adjusting the LCD DisplayTo turn on the computer’s power for the first time Turning On the ComputerTurning Off Your Computer Power OffPower Button Functions To turn off the computer, complete the following stepsTips for Using Your Computer Locking your Computer Travelling with Your ComputerAir Travel If you are travelling by air, follow these tipsHandling Spills Storing the Computer for Long PeriodsUsing the Keyboard Using the Numeric Keypad Using Special Function Keys Fn Key Key Name Key Function CombinationsTo reprogram the Sens Keyboard, follow the steps below Default settings for these buttons areUser Defined Buttons Sens Keyboard Using the Touchpad Scroll Button UseAction Process and Comment Click/Tap ProcessPS/2 Mouse Menu ActionArea or Multiple item selection Drag MoveTo move a window on the desktop, complete the following System Bottom Reading the System Status LightsSystem Top LED Name FunctionConnecting to the Internet Using the ModemClick Properties in the Modems tab section Precautions Before UseClick Edit in the Dialing Rules Tab Country SelectionIf you use a simple terminal program i.e. hyper terminal Using the LANCable Connection Modem NotesConfiguring Network Environment Regulatory Notice for Channel Use in France Wireless Connection Factory OptionTo display relative Signal Strength Icon Name DescriptionConfiguring Network Environment No networks are displayedDVD-ROM drive Using the Flex-BayCD-ROM R/W drive DVD/CD-RW Combo driveDevice Swap Swap a Flex-Bay Device Power OnTo swap a device with the power on proceed as follows Swap a Flex-Bay Device Power Off To remove a device with the power off proceed as followsUsing the CD/DVD-ROM Drive Using the Disk DrivesUsing the Floppy Disk Drive DVD NotesCD/DVD Precautions CD/DVD Drive WarningsTo insert the memory stick proceed as follows Using the Memory Stick Factory OptionInserting the Memory Stick Memory Stick SupportRemoving the Memory Stick Using the Memory StickTo see the contents of the Memory Stick To use the Memory Stick proceed as followsYour computer includes the following PC Card support Working with PC CardsMaintaining PC Cards To maintain your PC Cards, follow these guidelinesTo remove a PC Card from your computer Using PC CardsTo insert a PC Card into a slot Playing a Audio/Multimedia CD Multi Media Functions/EquipmentMedia Player Removing the Audio/Multimedia CDButtons & display for the MP3/CD Player operate as follows MP3/CD Player Factory OptionButton Operation Button Name FunctionPause/Resume an Audio CD Using the MP3/CD PlayerPlay an Audio CD Stop an Audio CDSetting Up Your Home Theater Dolby Digital & Home Theater System S/PDIF PortUsing the S/PDIF Connection After making all connections, ensure you enable S/PDIFEnabling S/PDIF on the DVD Program Using the Volume Control Icon Volume ControlUsing the Keyboard Movie MakerFollow these rules for charging your battery Using the BatteryCharging the Battery Page Installing the Battery Monitoring the Battery Charge Power MeterBattery Level Lower Right Battery GaugePower Source Top Right Radio Frequency Top LeftYou should Battery WarningsBattery Calibration Calibration NotesBios Caution Using System SetupStarting System Setup Menu FunctionNavigation Key Function Use Right Arrow to select the Advanced Cmos Setup menu Changing Booting PriorityBoot Device Priority field enables System Passwords Using System SecurityBios Security Bios security operations are explained belowTo create a password follow the instructions below If You Forget Your PasswordCreating a Password Use Down Arrow to select Password on bootAdvantages of Biometric Security are If password use is not desiredBiometric Security Factory Option Standby vs. Hibernation Using Power Management OptionsBasic Power Management Schemes Changing DevicesHibernate Mode Power Management or Manual Method Rest Key If You Reinstall WindowsFrequent Interruptions Advanced Power Management Schemes ReInstalling Windows and Device Drivers Using the Hard DriveInstalling/Reinstalling a HDD See the information below before you install your HDDVideo Features and Configuration Resolution and Colour DepthDisplay Resolution Notes Configuring Display FeaturesChanging Colour Depth and Resolution To set Dual View mode on your system Using Dual View ModeSetting Dual View Mode Select Start Control Panel Appearance and ThemesChanging Colour Depth and Resolution of 2nd Monitor TV Display Resolution LimitationsTo start using multimonitor mode proceed as follows Using Multimonitor ModeTo reset the system to Single View mode Start Display propertiesPowerplay Use Limitations Using PowerplayTo stop using multimonitor mode proceed as follows Using Options Before You Install Memory Memory ModulesMemory Module Precautions Installing a Memory ModuleTo install a memory module Port Replicator Bluetooth/WirelessWireless LAN FIR Fast Infrared Connection Bios SetupWindows Setup FIR Technology LimitationTroubleshooting System Recovery PrecautionPC Card does not work correctly Questions and AnswersOperating System Problems Video Problems Is the monitor properly connected to the computer?Modem Problems FAX Problems To reinstall the your Microsoft Windows XP Operating System Reinstalling SoftwareWindows Application/Driver ReInstallation If the Recovery Menu does not appear, proceed as followsLithium-Ion Smart Battery SpecificationsDimension EnvironmentAbbreviations Pcmcia Glossary Cmos memory DMA direct memory accessCardBus COM portIRQ interrupt request line Hard driveAddress LCD liquid-crystal displayPC Card RAM random access memoryResolution PC slotZoomed video Shadow RAMTFT thin film transistor LCD

Related manuals

Samsung NP10FP00MT/SEG Important Safety Information, Safety Instructions, Setting Up your System