Samsung NP10FK03NS/SEG, NP10FP02CD/SEG, NP10FP00UV/SEG, NP10FP00MT/SEG manual Modem Problems

Page 86

ProblemAction

There is LCD or CRT has noise (speckles, lines or raged edges) on the picture when playing a MPEG file with the Media player/ DVD software or using the USB camera.

Adjust the resolution and the colour to 1400 x 1050 and 32 bit to display clearly, or avoid playing two programs at the same time.

In DOS mode the CRT/LCD

The LCD only mode is not supported using this Key

button does not work.

combination.

 

 

If the connected CRT

If the refresh rate is not optimal for the connected

monitor display is not steady.

CRT, then this problem may occur.

 

To correct this problem do the following:

1.Click Start > Settings > Control Panel.

2.Double-click the Display icon to open the Display properties.

3.Select Settings

4.Click the Advanced button.

5.Click the Adapter tab

6.Adjust the Refresh rate to optimal or other selections until you see the CRT clearly.

Modem Problems

ProblemAction

My modem doesn't connect to services or disconnects during communication

If your modem has difficulty in connecting to on- line services and sustaining communications, first check if other devices are connected and remove them. Also remove any extension leads. Interference from certain devices or poor line power conditions may degrade the quality of your connection. Under these conditions gradually reduce the communication speed of your modem until a reliable connection is achieved.

Check with your on-line service provider.

76 Users Manual

Page 85 Page 87
Image 86
Page 85 Page 87
Contents
Macrovision Statement Setting Up your System Important Safety InformationSafety Instructions Care During Use Battery DisposalReplacement Parts and Accessories Laser Safety Note Laser SafetyPower Cord Requirements General RequirementsWireless Guidance Regulatory Compliance StatementsPage European Union European DirectivesPage Vcci Statement Wireless DevicesJapan Prior to setting up your device Information Icons Using Your DocumentationManual Documentation Conventions Keyboard ConventionsTouchpad Conventions Software User DocumentationCD-ROM Device Naming Convention Windows ConventionsFront Where Everything IsIntroducing Your Computer Buttons and LEDs Back Side Right SideLeft Side Bottom To install the battery pack Using Your Computer for the First TimeInstalling the Battery To attach the power cord Attaching the AC AdapterTo adjust the LCD Adjusting the LCD DisplayTo turn on the computer’s power for the first time Turning On the ComputerTurning Off Your Computer Power OffPower Button Functions To turn off the computer, complete the following stepsTips for Using Your Computer Locking your Computer Travelling with Your ComputerAir Travel If you are travelling by air, follow these tipsHandling Spills Storing the Computer for Long PeriodsUsing the Keyboard Using the Numeric Keypad Using Special Function Keys Fn Key Key Name Key Function CombinationsTo reprogram the Sens Keyboard, follow the steps below Default settings for these buttons areUser Defined Buttons Sens Keyboard Using the Touchpad Scroll Button UseAction Process and Comment Click/Tap ProcessPS/2 Mouse Menu ActionArea or Multiple item selection Drag MoveTo move a window on the desktop, complete the following System Bottom Reading the System Status LightsSystem Top LED Name FunctionConnecting to the Internet Using the ModemClick Properties in the Modems tab section Precautions Before UseClick Edit in the Dialing Rules Tab Country SelectionIf you use a simple terminal program i.e. hyper terminal Using the LANCable Connection Modem NotesConfiguring Network Environment Regulatory Notice for Channel Use in France Wireless Connection Factory OptionTo display relative Signal Strength Icon Name DescriptionConfiguring Network Environment No networks are displayedDVD-ROM drive Using the Flex-BayCD-ROM R/W drive DVD/CD-RW Combo driveDevice Swap Swap a Flex-Bay Device Power OnTo swap a device with the power on proceed as follows Swap a Flex-Bay Device Power Off To remove a device with the power off proceed as followsUsing the CD/DVD-ROM Drive Using the Disk DrivesUsing the Floppy Disk Drive DVD NotesCD/DVD Precautions CD/DVD Drive WarningsTo insert the memory stick proceed as follows Using the Memory Stick Factory OptionInserting the Memory Stick Memory Stick SupportRemoving the Memory Stick Using the Memory StickTo see the contents of the Memory Stick To use the Memory Stick proceed as followsYour computer includes the following PC Card support Working with PC CardsMaintaining PC Cards To maintain your PC Cards, follow these guidelinesTo remove a PC Card from your computer Using PC CardsTo insert a PC Card into a slot Playing a Audio/Multimedia CD Multi Media Functions/EquipmentMedia Player Removing the Audio/Multimedia CDButtons & display for the MP3/CD Player operate as follows MP3/CD Player Factory OptionButton Operation Button Name FunctionPause/Resume an Audio CD Using the MP3/CD PlayerPlay an Audio CD Stop an Audio CDSetting Up Your Home Theater Dolby Digital & Home Theater System S/PDIF PortUsing the S/PDIF Connection After making all connections, ensure you enable S/PDIFEnabling S/PDIF on the DVD Program Using the Volume Control Icon Volume ControlUsing the Keyboard Movie MakerFollow these rules for charging your battery Using the BatteryCharging the Battery Page Installing the Battery Monitoring the Battery Charge Power MeterBattery Level Lower Right Battery GaugePower Source Top Right Radio Frequency Top LeftYou should Battery WarningsBattery Calibration Calibration NotesBios Caution Using System SetupStarting System Setup Menu FunctionNavigation Key Function Use Right Arrow to select the Advanced Cmos Setup menu Changing Booting PriorityBoot Device Priority field enables System Passwords Using System SecurityBios Security Bios security operations are explained belowTo create a password follow the instructions below If You Forget Your PasswordCreating a Password Use Down Arrow to select Password on bootAdvantages of Biometric Security are If password use is not desiredBiometric Security Factory Option Standby vs. Hibernation Using Power Management OptionsBasic Power Management Schemes Changing DevicesHibernate Mode Power Management or Manual Method Rest Key If You Reinstall WindowsFrequent Interruptions Advanced Power Management Schemes ReInstalling Windows and Device Drivers Using the Hard DriveInstalling/Reinstalling a HDD See the information below before you install your HDDVideo Features and Configuration Resolution and Colour DepthDisplay Resolution Notes Configuring Display FeaturesChanging Colour Depth and Resolution To set Dual View mode on your system Using Dual View ModeSetting Dual View Mode Select Start Control Panel Appearance and ThemesChanging Colour Depth and Resolution of 2nd Monitor TV Display Resolution LimitationsTo start using multimonitor mode proceed as follows Using Multimonitor ModeTo reset the system to Single View mode Start Display propertiesPowerplay Use Limitations Using PowerplayTo stop using multimonitor mode proceed as follows Using Options Before You Install Memory Memory ModulesMemory Module Precautions Installing a Memory ModuleTo install a memory module Port Replicator Bluetooth/WirelessWireless LAN FIR Fast Infrared Connection Bios Setup Windows Setup FIR Technology LimitationTroubleshooting System Recovery PrecautionPC Card does not work correctly Questions and AnswersOperating System Problems Video Problems Is the monitor properly connected to the computer?Modem Problems FAX Problems To reinstall the your Microsoft Windows XP Operating System Reinstalling SoftwareWindows Application/Driver ReInstallation If the Recovery Menu does not appear, proceed as followsLithium-Ion Smart Battery SpecificationsDimension EnvironmentAbbreviations Pcmcia Glossary Cmos memory DMA direct memory accessCardBus COM portIRQ interrupt request line Hard driveAddress LCD liquid-crystal displayPC Card RAM random access memoryResolution PC slotZoomed video Shadow RAMTFT thin film transistor LCD
Related manuals
Manual 98 pages 34.62 Kb Manual 98 pages 49.08 Kb
Top Page Image Contents