CD/DVD Drive Warnings, CD/DVD Precautions

Samsung NP10FP00F2/SEF, NP10FP02CD/SEG, NP10FP00UV/SEG CD/DVD Drive Warnings, CD/DVD Precautions

Page 43

1.Press the button on the CD-ROM or DVD-ROM drive, and the tray slides out. (Do not lean on the tray; because it will not support much weight.)

CD/DVD Drive Warnings:

Do not place reflective objects other than the CD/DVD disks in the disk slot because of possible hazardous laser emissions. The laser beam used in this CD/DVD-ROM drive is harmful to the eyes. Do not attempt to disassemble the CD/DVD-ROM drive. Refer servicing to your authorized service center.

Do not touch the CD/DVD lens, doing so may damage the device.

CD/DVD Precautions:

The tray may be stuck, in which case straighten out a paper clip, insert it into the Emergency Eject hole in the front of the CD/DVD-ROM and push it until the tray ejects.

A LED on the drive tray is on when the computer is reading from a CD. Do not remove a disc when this LED is on.

To clean a CD/DVD, wipe from the center outwards with clean and dry cloth. Remove the CD/DVD when the drive activity LED is off.

2.Insert a CD/DVD, label side up (or remove a disc, if you have finished using it).

3.Push the tray in gently to close the drive tray.

CD-ROM Light

Eject Button	Emergency
	Eject Button

Install and/or start a CD-based program as you would run a program on a floppy disk.

Using the Disk Drives 33

Image 43

Contents

Macrovision Statement Safety Instructions Important Safety InformationSetting Up your System Replacement Parts and Accessories Battery DisposalCare During Use General Requirements Laser SafetyPower Cord Requirements Laser Safety NoteRegulatory Compliance Statements Wireless GuidancePage European Directives European UnionPage Japan Wireless DevicesVcci Statement Prior to setting up your device Keyboard Conventions Using Your DocumentationManual Documentation Conventions Information IconsWindows Conventions Software User DocumentationCD-ROM Device Naming Convention Touchpad ConventionsIntroducing Your Computer Where Everything IsFront Buttons and LEDs Left Side Right SideBack Side Bottom Installing the Battery Using Your Computer for the First TimeTo install the battery pack Attaching the AC Adapter To attach the power cordTurning On the Computer Adjusting the LCD DisplayTo turn on the computer’s power for the first time To adjust the LCDTo turn off the computer, complete the following steps Power OffPower Button Functions Turning Off Your ComputerTips for Using Your Computer If you are travelling by air, follow these tips Travelling with Your ComputerAir Travel Locking your ComputerStoring the Computer for Long Periods Handling SpillsUsing the Keyboard Using the Numeric Keypad Fn Key Key Name Key Function Combinations Using Special Function KeysUser Defined Buttons Sens Keyboard Default settings for these buttons areTo reprogram the Sens Keyboard, follow the steps below Scroll Button Use Using the TouchpadClick/Tap Process Action Process and CommentAction PS/2 Mouse MenuTo move a window on the desktop, complete the following Drag MoveArea or Multiple item selection LED Name Function Reading the System Status LightsSystem Top System BottomUsing the Modem Connecting to the InternetCountry Selection Precautions Before UseClick Edit in the Dialing Rules Tab Click Properties in the Modems tab sectionModem Notes Using the LANCable Connection If you use a simple terminal program i.e. hyper terminalConfiguring Network Environment Icon Name Description Wireless Connection Factory OptionTo display relative Signal Strength Regulatory Notice for Channel Use in FranceNo networks are displayed Configuring Network Environment DVD/CD-RW Combo drive Using the Flex-Bay CD-ROM R/W drive DVD-ROM driveTo swap a device with the power on proceed as follows Swap a Flex-Bay Device Power OnDevice Swap To remove a device with the power off proceed as follows Swap a Flex-Bay Device Power OffDVD Notes Using the Disk DrivesUsing the Floppy Disk Drive Using the CD/DVD-ROM DriveCD/DVD Drive Warnings CD/DVD PrecautionsMemory Stick Support Using the Memory Stick Factory OptionInserting the Memory Stick To insert the memory stick proceed as followsTo use the Memory Stick proceed as follows Using the Memory StickTo see the contents of the Memory Stick Removing the Memory StickTo maintain your PC Cards, follow these guidelines Working with PC CardsMaintaining PC Cards Your computer includes the following PC Card supportTo insert a PC Card into a slot Using PC CardsTo remove a PC Card from your computer Removing the Audio/Multimedia CD Multi Media Functions/EquipmentMedia Player Playing a Audio/Multimedia CDButton Name Function MP3/CD Player Factory OptionButton Operation Buttons & display for the MP3/CD Player operate as followsStop an Audio CD Using the MP3/CD PlayerPlay an Audio CD Pause/Resume an Audio CDDolby Digital & Home Theater System S/PDIF Port Setting Up Your Home TheaterAfter making all connections, ensure you enable S/PDIF Using the S/PDIF ConnectionEnabling S/PDIF on the DVD Program Movie Maker Volume ControlUsing the Keyboard Using the Volume Control IconCharging the Battery Using the BatteryFollow these rules for charging your battery Page Installing the Battery Power Meter Monitoring the Battery ChargeRadio Frequency Top Left Battery GaugePower Source Top Right Battery Level Lower RightCalibration Notes Battery WarningsBattery Calibration You shouldMenu Function Using System SetupStarting System Setup Bios CautionNavigation Key Function Boot Device Priority field enables Changing Booting PriorityUse Right Arrow to select the Advanced Cmos Setup menu Bios security operations are explained below Using System SecurityBios Security System PasswordsUse Down Arrow to select Password on boot If You Forget Your PasswordCreating a Password To create a password follow the instructions belowBiometric Security Factory Option If password use is not desiredAdvantages of Biometric Security are Changing Devices Using Power Management OptionsBasic Power Management Schemes Standby vs. HibernationHibernate Mode Power Management or Manual Method Frequent Interruptions If You Reinstall WindowsRest Key Advanced Power Management Schemes See the information below before you install your HDD Using the Hard DriveInstalling/Reinstalling a HDD ReInstalling Windows and Device DriversResolution and Colour Depth Video Features and ConfigurationChanging Colour Depth and Resolution Configuring Display FeaturesDisplay Resolution Notes Select Start Control Panel Appearance and Themes Using Dual View ModeSetting Dual View Mode To set Dual View mode on your systemTV Display Resolution Limitations Changing Colour Depth and Resolution of 2nd MonitorStart Display properties Using Multimonitor ModeTo reset the system to Single View mode To start using multimonitor mode proceed as followsTo stop using multimonitor mode proceed as follows Using PowerplayPowerplay Use Limitations Using Options Memory Modules Before You Install MemoryTo install a memory module Installing a Memory ModuleMemory Module Precautions Wireless LAN Bluetooth/WirelessPort Replicator FIR Technology Limitation Bios SetupWindows Setup FIR Fast Infrared ConnectionSystem Recovery Precaution TroubleshootingOperating System Problems Questions and AnswersPC Card does not work correctly Is the monitor properly connected to the computer? Video ProblemsModem Problems FAX Problems If the Recovery Menu does not appear, proceed as follows Reinstalling SoftwareWindows Application/Driver ReInstallation To reinstall the your Microsoft Windows XP Operating SystemEnvironment SpecificationsDimension Lithium-Ion Smart BatteryAbbreviations Pcmcia Glossary COM port DMA direct memory accessCardBus Cmos memoryLCD liquid-crystal display Hard driveAddress IRQ interrupt request linePC slot RAM random access memoryResolution PC CardTFT thin film transistor LCD Shadow RAMZoomed video

Related manuals

Samsung NP10FP00F2/SEF, NP10FP02CD/SEG, NP10FP00UV/SEG CD/DVD Drive Warnings, CD/DVD Precautions

CD/DVD Drive Warnings:

CD/DVD Precautions: