Samsung NP20FP0060/SEF, NP20FP0SHG/SEG Case 1 Dual Display mode, Case 2 LCD Only Display mode

Page 69

ProblemAction

Nothing appears on the external monitor when you switch the display to it.

Is the monitor properly connected to the computer? Is the monitor’s power cord connected to an AC wall outlet? Check the brightness and contrast controls on the monitor. Does the program appear on the LCD panel instead of the external monitor? If so, press <Fn+F3> to switch to the monitor. Try turning the monitor off and on again.

The LCD screen doesn’t fit	Case 1 - Dual Display mode
the panel size (1024 X 768)	“Dual Display” mode does not support panel fitting.
when playing games or using	Case 2 - LCD Only Display mode
applications.	Enable the “Panel Fit” to fix this problem.
	1.Right-click touchpad or mouse button.
	2.Select Graphics Options > Panel Fit > Enable.

The external monitor	Check the cables between the monitor and the
displays flashes or waves.	computer. Are they properly installed?

Cannot toggle between CRT	If you are using the Multimonitor mode, you can not
and LCD while playing 3D	use the <Fn+F3> key combination and also you
games, MPEG files or DVD	cannot use this function in 3D games using
files.	Direct-X.

Cannot see display screen	First start in "Safe Mode" then restart Windows. It is
after uninstalling the video	recommended that you reconnect the CRT and set to
driver.	"CRT and LCD" before you uninstall the video
	driver. Restart Windows and access the Recovery
	Boot Menu by pressing the F8 key after the initial
	Samsung splash screen. Select starting the system in
	VGA mode. Reinstall the Video Driver.

There is LCD or CRT has noise (speckles, lines or raged edges) on the picture when playing a MPEG file with the Media player/ DVD software or using the USB camera.

Adjust the resolution and the colour to 1024 x 768 and 32 bit to display clearly, or avoid playing two programs at the same time.

The screen is distorted when switching from windowed DOS screen to full DOS screen or entering Hibernate Mode.

Disable the “Panel Fit” to avoid this problem.

1.Right-click touchpad or mouse button.

2.Select Graphics Options > Panel Fit > Disable.

Troubleshooting 61

Image 69

Contents Macrovision Statement Important Safety Information Safety InstructionsSetting Up your System Battery Disposal Replacement Parts and AccessoriesCare During Use Power Cord Requirements Laser SafetyLaser Safety Note General RequirementsRegulatory Compliance Statements Wireless GuidancePage European Directives European UnionPage Manual Documentation Conventions Using Your DocumentationInformation Icons Keyboard ConventionsCD-ROM Device Naming Convention Software User DocumentationTouchpad Conventions Windows ConventionsWhere Everything Is Introducing Your ComputerFront Buttons and LEDs Right SideLeft Side Back Side Fan Vent Battery LatchBottom CompartmentUsing Your Computer for the First Time Installing the BatteryTo install the battery pack Attaching the AC Adapter To attach the power cordTo turn on the computer’s power for the first time Adjusting the LCD DisplayTo adjust the LCD Turning On the ComputerPower Button Functions Power OffTurning Off Your Computer To turn off the computer, complete the following stepsTips for Using Your Computer Air Travel Travelling with Your ComputerLocking your Computer If you are travelling by air, follow these tipsStoring the Computer for Long Periods Handling SpillsUsing the Keyboard Using the Numeric Keypad Fn Key Key Name Key Function Combinations Using Special Function KeysDefault settings for these buttons are User Defined Buttons Sens KeyboardTo reprogram the Sens Keyboard, follow the steps below Action Process and Comment Using the TouchpadAction PS/2 Mouse MenuDrag Move To move a window on the desktop, complete the followingArea or Multiple item selection Name Function Reading the System Status LightsUsing the Modem Connecting to the InternetClick Edit in the Dialing Rules Tab Precautions Before UseClick Properties in the Modems tab section If you use a simple terminal program i.e. hyper terminalCable Connection Using the LANModem Notes Network ProtocolsConfiguring Wired Network Environment To display relative Signal Strength Wireless Connection Factory OptionNetwork Settings Regulatory Notice for Channel Use in FranceNo networks are displayed Configure the Wireless Network Adapter as followsUsing the Floppy Disk Drive Using the Disk DrivesUsing the CD/DVD-ROM Drive DVD NotesCD/DVD Precautions Using PC Cards Working with PC CardsMaintaining PC Cards To remove a PC Card from your computer Media Player Multi Media Functions/EquipmentPlaying a Audio/Multimedia CD Removing the Audio/Multimedia CDDolby Digital & Home Theater System S/PDIF Port Setting Up Your Home TheaterAfter making all connections, ensure you enable S/PDIF Using the S/PDIF ConnectionClick Options Advanced Controls Operating systems other than Windows XPEnabling S/PDIF on the DVD Program Using the Keyboard Volume ControlUsing the Volume Control Icon Movie MakerUsing the Battery Charging the BatteryFollow these rules for charging your battery Removing the Battery Safely Using the BatteryFollow these guidelines to safely use the battery To remove the battery from the computerMonitoring the Battery Charge Battery Warnings Power MeterYou should Starting System Setup Using System SetupBios Caution Menu FunctionNavigation Key Function Boot Device Priority field enables Changing Booting PrioritySystem Passwords Using System SecurityIf You Forget Your Password Creating a PasswordIf password use is not desired Basic Power Management Schemes Using Power Management OptionsStandby vs. Hibernation Changing DevicesHibernate Mode Power Management or Manual Method If You Reinstall Windows Frequent InterruptionsStandby Key Advanced Power Management Schemes Using the Hard Drive Removing the Hard DriveTo remove the hard drive from the computer Installing a Hard Drive ReInstalling Windows and Device DriversTo install a hard drive Resolution and Colour Depth Video Features and ConfigurationConfiguring Display Features Changing Colour Depth and ResolutionDisplay Resolution Notes Using Multi-Monitor Mode Using Multi-Monitor ModeTo start using Multi-Monitor mode proceed as follows To stop using multi-monitor mode proceed as followsUsing Options Authorised Reseller OptionsFactory Options Wireless LAN Before You Install MemoryMemory Modules Installing a Memory Module To install a memory moduleKeyboard Removal Memory Module Cover Keyboard Ribbon Cable Memory Module Precautions System Recovery Precaution TroubleshootingQuestions and Answers Operating System ProblemsVideo Problems Case 2 LCD Only Display mode Case 1 Dual Display modeSelect Graphics Options Panel Fit Enable Select Graphics Options Panel Fit DisableModem Problems To correct this problem do the followingSelect Graphics Options Graphics Settings FAX Problems Windows Application/Driver ReInstallation Reinstalling SoftwareTo reinstall the your Microsoft Windows XP Operating System If the Recovery Menu does not appear, proceed as followsDimension SpecificationsLithium-Ion Smart Battery EnvironmentAbbreviations Pcmcia Glossary CardBus DMA direct memory accessCmos memory COM portAddress Hard driveIRQ interrupt request line LCD liquid-crystal displayResolution RAM random access memoryPC Card PC slotShadow RAM TFT thin film transistor LCDZoomed video

Related manuals

Manual 122 pages 48.46 Kb

Manual 114 pages 56.82 Kb