Installing a Hard Drive
To install a hard drive:
1.Remove the old hard drive from the computer as described in the previous section.
2.Remove the 4 HDD retaining screws to remove the old HDD from the drive bracket.
3.Place the new HDD into the drive bracket and the replace the 4 retaining screws.
4.Slide the new drive into the hard drive compartment. Make sure the drive is pushed back as far as it will go.
5.Install the screw that holds the hard drive in place.
6.If required install windows and appropriate device drivers according to the instructions below.
(Re)Installing Windows and Device Drivers
Use System Recovery CD to (re)install OS and System Software CD to (re)install device' drivers.
The System Recovery CD is used to (re)install the OS and System Software to a new HDD or recover from a system crash.
Notebook computers that ship from the factory include System Recover CD- ROM and System Software
In the unlikely event that programs on the computer hard drive become corrupted or are erased, you can use the System Recovery
50 Users Manual