Using Your Computer for the First Time
This section gives you detailed information on using your computer for the first time.
Installing the Battery
To install the battery pack:
1.With the computer’s power off, close the LCD panel and turn the computer over so the bottom of the unit faces up.
2.Slide the battery compartment cover latch to the left then slide the cover straight up and off the computer.
Insert the battery into the battery compartment, ensuring the correct orientation so that the battery fits in its slot properly.
3.Slide the battery pack into the compartment. Make sure the battery is fully inserted into the compartment. Carefully fold up the wire removal device.
4.Align the tabs on the battery compartment cover with the slots on the battery compartment.
5.Push the cover straight down until it snaps into place.
6 Users Manual