| -d [-- | disk] | |
| -d or -- | disk is used to input the physical disk index listed in the –L or list command.-- |
| | |
| Arguments: | None |
| | | |
| Used with: | --erase, --firmware-update, --trim, --overprovision, --smart, --benchmark, --info, |
| --sctcachestate |
| | |
| | | |
| | | magician --disk 1 --erase |
| | | magician --disk 1 --firmware-update --path <fwpackage-path> |
| | | magician --disk 1 --trim |
| | | magician --disk 1 --over-provision --set 25% |
| | | magician --disk 1 --smart |
| | | magician --disk 1 --setmax --set 123456 |
| | | magician --disk 1 --writecache --set 1 |
| | | magician --disk 1 --sctcachestate |
| | | magician --disk 1 --info |
| Usage: | [or] |
| magician -d 1 –E |
| | | magician -d 1 -F -p <fwpackage-path> |
| | | magician -d 1 -T |
| | | magician -d 1 -O -s 25% |
| | | magician -d 1 -S |
| | | magician -d 1 -M -s 123456 |
| | | magician -d 1 -W -s 1 |
| | | magician -d 1 -X |
| | | magician -d 1 –I |
| | | |
※Note: Arguments provided above are only for illustration purpose.
For SSDs directly connected to the system, the disk number should be inputted as “-d 0” and for RAID configuration “-d 2:0:1”, where 2 -Library type, 0 -Controller number, and 1 -disk number.