Samsung VP-D371/XEO manual Troubleshooting, 102, Self Diagnosis Display, Moisture Condensation

ENGLISH

Troubleshooting

Troubleshooting

✤ Before contacting a Samsung authorized service center, perform the ✤ following simple checks.

They may save you the time and expense of an unnecessary call.

Self Diagnosis Display

	Display			Blinking	Informs that...	Action
				slow	The Battery pack is almost discharged.	Change to a charged one.
Tape end!				slow	When the remaining time on the	Prepare a new one.
					tape is about 2 minutes.
Tape end!				no	The tape reached its end.	Change to a new one.
No Tape!				slow	There is no tape in Camcorder.	Insert a tape.
Protection!				slow	The tape is protected from recording.	If you want to record, release
						the protection.
				slow	The Camcorder has some	1. Eject the tape.
		...D			mechanical fault.	2. Set to OFF.
			L			3. Detach the battery.
						4. Reattach the battery.
			C
						* If unresolved contact your
			R			local Samsung service
						center.
				slow	Moisture condensation has formed	see below.
					in the Camcorder.

Moisture Condensation

■If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder,

on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.

To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor.

■If there is moisture inside the Camcorder, (DEW) is displayed.

If this happens, none of the functions except cassette ejection will work. Open the cassette compartment and remove the Battery.

Leave the Camcorder for at least two hours in a dry warm room.

102

				...
						.
Tape end!				2
!)
Tape end!				.
!)
No Tape!			.			.
)
Protection!				.
!)
	....D				1.	.
					2.
		L
					3.	.
		C			4.	.
		R
						.

■,

LENS ,

,

■ (DEW)