Samsung VP-D371/XEE, VP-D375W/XEF Maintenance, After Finishing a Recording, Usable Cassette Tapes

ENGLISH

Maintenance

After Finishing a Recording

✤At the end of a recording you must remove the power

	source.		1
✤ When recording with a Battery Pack, leaving the pack
	on the Camcorder can reduce the life span of the
	battery.
The Battery Pack should be release after recording is
completed.
1.	Open the Cassette door while sliding the [TAPE
	EJECT] switch in the direction or the arrow.
	■	Pull the cassette compartment out automatically.	3
	■	Please wait while the tape is completely ejected.
2.	After removing the tape, close the door and store the
	Camcorder in a dust free environment. Dust and other
	foreign materials can cause square-shaped noise or
	jerky images.
3.	Set the [Power] switch to the [OFF].
4.	Disconnect the power source or remove the Battery
	Pack. Press the [BATTERY RELEASE] switch located
	on the bottom of the Camcorder and slide the Battery
	Pack in the direction of the arrow.

✤

✤,

1. []

■

■

2.

3.[Power] [OFF]

4.

[BATTERY RELEASE]

Usable Cassette Tapes

When you have recorded something that you wish to keep, you can protect it so that it will not be accidentally erased.

a.Protecting a tape: Push the safety tab on the cassette so that the hole is uncovered.

b.Removing the tape protection:

If you no longer wish to keep the recording on the cassette, push the safety tab back so that

it covers the hole.

How to store a tape

a.Avoid places with magnets or magnetic interference.

b.Avoid humidity and dust prone places.

c.Keep the tape in an upright position and avoid storing it in direct sunlight.

d.Avoid dropping or knocking your tapes.

aSAVE

bREC

,

a.

b.:

a.

b.

c.

d.

99