Samsung VP-D375WI/HAC manual Connecting to a TV which has no Audio/Video Input Jacks, SC-D371/D372

ENGLISH

Playback

Connecting to a TV which has no Audio/Video Input Jacks				A/V
✤ You can connect your Camcorder to a TV through a VCR.				✤
1.	Connect the Camcorder to your VCR with
	the Audio/Video Cable.		VCR
	■	The yellow jack: Video		Camcorder
	■	The white jack: Audio(L) - Mono
	■	The red jack: Audio(R)		Audio/Video
2.	Connect a TV to the VCR.			Cable
3.	Set the [Power] switch to [PLAYER].		TV
	Set the [Mode] switch to [TAPE].
4.			Signal flow
	(SC-D375(H)/D975 only)
5.	Turn on both the TV and VCR.		Audio/Video
			Cable
	■	Set the input selector on the VCR to	Antenna
		Line.		SC-D375(H)/D975
	■	Select the channel reserved for your VCR	SC-D371/D372
		on the TV set.

6.	Play the tape.
Playback		√	√
1.	Connect a power source and set the
	[Power] switch to [PLAYER].
2.	Set the [Mode] switch to [TAPE].
	(SC-D375(H)/D975 only)

3.Insert the tape you wish to play back.

4.Using the [œœ (REW)]/[√√(FF)] buttons, find the first position you wish to play back.

5.Press the [√❙❙ (PLAY/STILL)] button.

■The images you recorded will appear on the TV after a few seconds.

■If a tape reaches its end while being played back, the tape will rewind automatically.

[ Notes ]

■	The playback mode (SP/LP) is selected automatically.
■	If only a mono audio input is available on the TV set, use the audio cable
	with the white jack (Audio L).

A/V

1.

VCR

■:

■ : -

■:

2.VCR

3.[Power] [PLAYER]

4.[Mode] [TAPE]SC-D375(H)/D975)

5.VCR

■	VCR	Line
■

6.

1.[Power] [PLAYER]

2.[Mode] [TAPE]SC-D375(H)/D975)

3.

4.

[œœ (REW)] /[ √√ (FF)]

5.[√■■ (PLAY/STILL)]

	■
	■
[	]
■	(SP/LP)
■	(Audio L)

66