Samsung EC-L110ZBBA/GB, EC-L110ZPDA/E3, EC-L110ZSBA/FR manual Exposure compensation, Shutter button

Setting up the recording function using the camera buttons

„Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.

Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions.

However, you can adjust exposure value by using [EV] menu.

1. Select the CUSTOM () menu of the

White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white.

2. MENU/OK button : selects previous custom white balance.

Shutter button	: saves new custom	White Paper
	white balance.

„Compensating Exposure

1.Press the Fn button, and then use the UP and DOWN buttons to select the exposure compensation icon ().

The exposure compensation menu bar will appear as shown.

2.Use the LEFT and RIGHT buttons to set the desired exposure compensation factor.

EV

ξThe custom white balance value will be applied, starting with the next picture you take.

ξThe user configured white balance will be remain effective until it is overwritten.

3.Press the Fn button again. The value you set will be saved and the Exposure Compensation setup mode will close.

If you change the exposure value, the exposure indicator () will be displayed on the bottom of the LCD monitor.

KA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

42