Basic Features
■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio,
✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
RF: Set the output level for signals greater or less than
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults. ¦¦ Selecting the Sound Mode
When you set to Dual | |
sound mode is displayed on the screen. | DUAL |
| Audio | Dual | Default | |
| Type | |||
|
|
| ||
A2 | Mono | Mono | Automatic | |
Stereo | Stereo ↔ Mono | change | ||
Stereo | ||||
Dual | Dual f↔ Dual g | Dual f | ||
| ||||
| Mono | Mono | Automatic | |
NICAM | Stereo | Mono ↔ Stereo | change | |
Stereo | Dual | Mono ↔ Dual f | Dual f | |
| Dual g | |||
|
|
|
✎✎If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
Setup Menu
¦¦ Setting the Time
Time
■■ Clock: Setting the clock is for using various timer features of the TV.
OO The current time will appear every time you press the INFO button.
✎✎ If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
✎✎ The antenna must be connected in order to set the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
✎✎ Available only when Clock Mode is set to Manual.
Time Zone (depending on the country): Select your time zone.
✎✎ When Country is set to Others, you can use this function.
✎✎ This function is only available when the Clock Mode is set to Auto.
¦¦ Using the Sleep Timer
■■ Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
✎✎ To cancel Sleep Timer, select Off.