Samsung STB-E7500/EN manual Connected Device, Broadcasts, That is connected to the this product

Settings

Audio

Connected Device

NOTE

\\ For users whose TV is the only sound-producing device: -- If the TV does not support Dolby Digital bitstream input via

HDMI, no specific setting is required.

-- If the TV supports Dolby Digital bitstream input via HDMI, set "Digital Output" to "PCM".

By doing so, the "Connected Device" will not require further setup.

\\ If the DTV Program you are watching is produced according to EBU R128, The Average Loudness between MPEG1 Layer2 Audio and Dolby Digital / Dolby Digital Plus audio can be reduced. If the DTV Program do not meet the EBU R128, There may be still some amount of difference of average Loudness between a TV Programs.

\\ Substantial number of AV Receiver / Home Theatre Device decode Dolby Digital / Dolby Digital Plus with +4dB OFFSET when compared to same encoding level of PCM input.

This kind of product include both THX Certified one and also none THX Certified one.

If user select "AV Receiver(Offset mode)", the average loudness between Dolby Digtial / Dolby Digital Plus audio decoded by such a product and MPEG1 Layer2 Audio decoded by this product will be similar.

Channel		Selects an appropriate type of antenna for digital
		broadcasts.
	Aerial	Before your product can begin memorizing the available
		channels, you must specify the type of signal source
		that is connected to the this product.
		Select this to change the country.
		Enter the desired 4-digit password using the number
		buttons. Default password is set to 0000.
	Country	NOTE
		\\ Password : Enter the desired 4-digit password using the
		number buttons.
		-- France, Italy : You can not set the password to "0000".
		Please choose other numbers.
		-- Others : Default password is set to 0000.

24 English