Samsung RF24FSEDBSR/EF manual Operating your French Door Refrigerator, Using the Control Panel

Operating your French Door Refrigerator

USING THE CONTROL PANEL

( 3 )
Alarm	The Alarm button serves two purposes:		02operating
(Hold 3
	--	To turn the door open alarm on and off.
sec for
	--	To reset the water filter life indicator.
Filter
	1) Door Alarm Function
Reset
	If the door alarm is set to On, an alarm

1

2

3

10 7

4

5

6

9 8

beeps if any refrigerator door is left open

for more than three minutes. The beeping

stops when you close the door. The door

alarm function is pre-set to On in the

factory. You can turn it off by pressing and

then releasing the Alarm button. You can

turn it back on in the same fashion. The

icon lights up when the function is on.

When the Door Alarm function is on and

the alarm sound is triggered, the Door

Alarm Icon will blink while the alarm

sounds.

( 1 )	Touching this button turns Energy Saver
Energy	mode on and off. When you turn Energy
Saver	Saver on, the Energy Saver icon lights.
	Turn Energy Saver off and the icon goes
	off. The Energy Saver function’s factory
	setting is “ON”. If condensation or water
	drops appear on the doors, turn the
	Energy Saver mode off.
( 2 )	The Freezer button serves two purposes:
Freezer	--	To set the Freezer to your desired
(Hold 3		temperature.
sec for	--	To turn the power freeze function on
Power		and off.
Freeze)	1) To set the Freezer temperature
	Touch the Freezer button to set the
	Freezer to your desired temperature. You
	can set the temperature between -15 °C
	and -23 °C.
	2) Power Freeze function
	Touch and hold this button for 3 seconds
	to decrease the time needed to freeze
	products in the Freezer.
	It can be helpful if you need to quickly
	freeze easily spoiled items or if the
	temperature in the freezer has warmed
	dramatically (For example, if the door was
	left open).
	When you use this function the energy
	consumption of the refrigerator will
	increase. Remember to turn it off when
	you don’t need it and return the freezer
	to your original temperature setting. If you
	need to freeze large amount of food stuff,
	activate Power Freeze function at least 20
	hours before.

2)Water Filter Life Indicator Function After you replace the water filter, touch and hold this button for 3 seconds to reset the water filter life indicator. When you reset the water filter life indicator, the Filter icon on the panel turns Off. The Filter icon will turn red to let you know it is time to change the water filter after six months (about 300 gallons). Some areas have large amounts of lime in their water,

which causes the water filter to	clog more
quickly. If this is the case in your area,
you will have to change the filter	more

frequently than every six months.

operating _23

DA68-02916G-12.indb 23 2016. 3. 24.

�� 8:20