20 Chapter 3: Using The VeniceU With USB
VeniceU
Operator Manual
3In the User Account Control dialog
box, click Yes.
4In the “Welcome ...” screen of the
Setup dialog box, click Next.
5In the “Choose Install Location” screen
of the Setup dialog box, choose the
destination of the USB driver and click
Install.
The installation will begin.
6During the installation procedure the
following dialog box will appear. Plug
the USB cable into the VeniceU console
(type B connector) and into your PC
(type A connector). Then switch on the
console and click OK in the dialog box.